For sure he sent them to the right address ...... I received mine :woot: :woot: :woot: .
Sorry for the joke, but it was too funny ;) .

Bye
Ema
P.S. Just joined the Iso's bitches club ...

Bit sceptical about the belt tensioner, how the hell does it work and am unsure if its a replacement for the rear top deck mount or something else?

I actually think my design on the L brace is much better and cheaper.:thumbsup:

by looking at the zxr manual and comparing it with the part in auction i'd say its definatly a replacement for the centre upper deck mount, the part that comes in 2 pieces,

I believe it is a replacement for the Upper Deck Mount (B) and the Mount Collar (A) in the Lazer ZX manual.

The bearing should be sitting on the top (the left side in the picture is the top)

That should be an correct description of usage. :)
Think i have to order that ......damn.........
Wonder of he would be interested in making the reardeck ( la-31 ) mount and the motorplate also ....

mvh Isobarik

I still am very sceptical as its fixed and doesnt account for belt stretching unlike my L brace design where its better suited and doesnt cost the earth.

Also looks very much like my top deck mount design two piece Manolis made me for my zxs, so maybe be a new supplier of alloy parts which is good.

I don't think the bearing is fixed. If you looking carefully where the bolt is, you can see lights (in the dark area) are coming thru the part. I would assume there is a slot there, where you can adjust the height of the bearing.

I am all for the L brace design. I also made one myself, but its giving tension from the bottom, not the top.


Welshy, plastic injection is too expensive for the front gear box. I am machining it out of Aluminum 7075.

http://i1127.photobucket.com/albums/.../Gearbox-1.jpg

There will be a think lexan that goes in the groove in the middle to keep dirts out. I am refining the design to make it more manufacturable. I will send you a set to abuse with once I am done.

Oosh looking good sign me up for one when youre done.

mvh Isobarik

Great idea, similar to the zxs design.

Quotes are in for the kevlar corded polyurethane belts.

$25 USD a set + shipping.

Still interested?

I am asking about the colours now.

Had a word with Fibrelyte and have redesigned the front tower, only fractionally but hope also that they extra hole is back on. When I get it I will fit and send pics.

Ive also redesigned my owbe version top deck as if I am using my L brace belt tensioner and decide more tension the front of the belt hits the back of the front brace on the deck so I have moved the brace more back wards to give more freedom for the belt to move properly.

Finally the new gear box development is starting for the rear end of the car, this will be when finished after testing and developing the only one gear box you will ever need. Its going to be carbon fibre, and is going to be a work of art.

Interested depending on colour.

mvh Isobarik

Can't wait to see it!

When will it be available?

Colours are...

http://i1127.photobucket.com/albums/...123/COLORS.jpg

Any of the above. Ignore the descriptions.

First cad drawings are being started now, one we have found the right way then the proto will be built so unsure. My goal is by mid year 2012 to get this done.

If you need any help, I am definitely willing to help. 3D modeling, machining, anything.

Just had to buy the blue aluminum mount from pargu should be in my hands soon will post some pics.

mvh Isobarik

cant wait to see what you make of it,

I will make an pedistal where i can chain my b*****s that owes me money ....:woot:

... not really shall put it on the chassi i got from Ema and make another lazer zxr....have already ordered the la-245 shall see if they are a direct fit or....

mvh Isobarik

Hi there just incase any one that wants to see my tachy paintjob...:D

http://proxy1.pixbox.se/arkivet/synl...32785617.jpg?0

And yes the camera is crap.

And yes i know i dont have that artistic feeling.....

but it was very much appreciated. :thumbsup:

And yes i know that the front uj´s are missing since they have flead to signorio borginio spagetthi...:thumbsup:

Switched to sp-107 in the rear and 39655 for steering missing the
la-235 so i cant put on the la-219.7 :D

mvh Isobarik

Man, you guys are always talking in code ;) Looks good Henrik!

:thumbsup::thumbsup::thumbsup:

Thanks and yes we are talking in codes but when you learn the numbers it will be so easy to know what we mean but before one learn them its a bit like lottery :thumbsup:.

mvh Isobarik

well i like it,

its a bit like one of mine

yeah it does look like yourse an "splatt" love em looks good ron :D

And one have to admitt that yourse is so much better.....

mvh Isobarik

naaa, yours is better as you did it,

i didnt spray mine, it came with a second hand car


is that a bluegroove shell

Damn, You bought it already??

I am designing a set that is used with Lazer zx-5 or the TF-5's suspension bushings (LAW 32 / LAW 39)

Price would be cheaper as well.

The current pivot blocks work well. The plates on the zxs look great but can be a hinderance. Ive bent two so far and is the reason why i opted out. Also you need to buy the collars as if they are not allen keyed on it wont hold the wishbones on.

Sorry, misread, thought it said ZX-S DOH!!!

Sorry but i dont get it where the bushings go in the "upperdeck mount" :thumbsup: since thats what i bought.....

:D

mvh Isobarik

Yeah sure i did it every one can see that ...:thumbsup:
but yourse is still better and yes its an bluegroove body.

Well its really glossy.........

mvh Isobarik

Opps, I thought you bought the suspension shaft holders.

Iso, are you looking for this?

http://i1127.photobucket.com/albums/...osh123/RUM.jpg

Yup

exactly that ....

and now just the finned motor plate left...

mvh Isobarik

Thats whats needed and make sure its identical to the original as the last company that made it got the dimensions wrong so drilling the chassi was needed to fit it. As iso said mk one and mk two version finned motor plates as well, with both fitted that does dissapate the brushless motor heat very well. Looking very good.

Don't worry, I am very confident that it's identical to the real thing. I took measurements off of a brand new one. I am getting it quote this week.

I just had an idea, I revise the rear upper deck mount to be able to fit a fan to cool the motor

Good idea.....:thumbsup:

mvh Isobarik

Yup good idea, but not necessary as the metal mount and motor plate will be sufficient. However is you cut the metal post away from the bottom (between the two legs) centre of the mount then that should be plenty of room for you to add a small fan.

Also guys LA26 full set is on ebay worldwide (I searched under kyosho lazer zx) and found it on page 2 if set at 200 per page. Good hunting!!!

There's actually 2 different auctions for LA26 on the bay at the moment. One pair of ZXR and one of ZX arms :D

Guys,

OK I have finally fulfilled my promise and have updated the front shock tower. Please see pictures of original and newer beefed up version. Please note tem I actually cut off the body clip area.

Also attached is my newer designed top deck which takes into account my new L brace with belt tensioner so allows the belt to run freely without rubbing on the top deck area.:thumbsup: