![]() |
Major understeer
At the weekend at oswestry i had major understeer. Which was a bit of a pain. Im running the following setup as advised my Phil Sleigh
http://www.horizonhobby.co.uk/autoon...ts/exx4we1.jpg So can any one sugest a way to reduce understeer. I had enought steering entering the corner but coming out of it i was really strugerling. Especially on the 2nd corner and the last. Even when i went slow i still stuggled to get it round. A |
ash whats tyres were you running ??
and from what i saw , your car was way to fast for you (sorry) but you need to slow it down .. and you also seem to have your brakes set to much. |
Its not to fast for me. Everyone will now say i will say that but honest it isnt. I was running schumacher mini spikes yellow all round. I was suffering from grip role so cut the outer edge of spikes off. That still didnt stop the grip role then i cut the inner endge off then it stopped grip rolling. But i was getting understeer before i had cut any spikes off.
A |
Quote:
and sorry it was to fast.... |
how can you have grip roll and under steer
|
I was pretty quick i reacon i could have got 12 laps there yesterday but i just suffered from silly stuff that happened as this is the first time i have driven the car off road It is having a few problems the reason for not finashing 3 races was due to the fact i didnt know that i needed to glue the steering servo horn style thing on so it doesnt jump as i havent had an issue with this before as the other places i have raced at the track has been more forgiving. Afterwards i was practising it was going ace.
A |
I solved the grip roll problem but then i had major understeer.
Im confused ive gotmy mum going on. A |
Quote:
|
I can't see if you were running a one way or not, if not, there's your answer!
|
The motor wasnt to fast what so ever. I didnt post this post to be grilled about my driving i just had a bad weekend it just annoys me when people dont let you through when your lapping i was taken out twice by a back marker and broke my car. I know i shouldnt moan but it annoys me when i just ask nicely car 6 or what ever im coming though to lap can i have a little room. Then they just turn in on you or go all defensive cus they think your trying to overtake them. I admit the final was a technicall diffculty but round 1 and 4 were because i was taken out while trying to lap a slower car.
A |
and here's me trying to help !!!!!
i tell you what i wont bother then ... ash you may think im new at this because ive only been back 6 months but 14 years ago i had raced for 7 years or more before then and wasnt that bad if you ask certain people.. |
I guess this is called 'power on understeer' and yes, it is possible to have this and grip roll aswell. :)
G |
I know your an exsperianced racer paul and yes i do apreciate all help off everyone. And im not saying your not that good. I just dont find that motor to quick for me. I know your a very good driver by your results. And im sorry if i upset you i do apreciate your help paul your a top bloke but i just didnt find that motor to quick for me.
A |
And i do agree paul my brakes are set abit high i just wasnt sure what to set them to so i set them to stock.
A |
May I ask, Did you try slowing down for the corners? ....
|
Yes
A |
Quote:
A |
I use a one way clicker and its fine for steering, unless i have completely shagged front tyres, and great rears... Otherwise I have no problem... This question is directed at every1... or whatever... Will their be any differance with using a One way? to either a clicker.. or standard...?
|
Yeah a one way gives you more turn in but only rear braking so you can kick the tail out easily.
A clicker would give you more resistance on braking so is prob more stable although i never ran the clicker so cant comment on that properly. A diff makes the car really stable on braking and you can whack them on but the turn in wont be very electric, which i prefere. |
Sorry to bring up the speed thing again.. it is possible for a car to be too quick and give you less steering.. if the car is quick enough to fully unload the front shocks on power then there is no weight on the front to give steering.
Try going around the corner with no throttle or breaks.. just glide and see if you have problems then. if so.. it may well be the speed. if not then somthing else needs to be changed. |
Its very odd because certain corners i was fine but corner 2 wasnt that tight and i was strugerling around it but the next corner was tighter and i didnt have a problem. I just didnt seem to have to lockeven when i was going slow i strugled.
A |
If you drive too fast into a corner then it will tend to push wide, if you have uber grip ull just grip roll. The idea is to brake and turn tight, then you can get on the power quickly as you arn't miles off line.
|
Could be the steering horn (not one on servo, the other one), they can be a bit soft
|
Id also check the servo throw each side.
|
I treid it slow but i still wasnt any where near the racing line you could have driven two cars side by side up the inside of me. Which i wouldnt have minded normaly but there was a piece of pipe straight afterwards. Ill draw you a pic.
A |
Quote:
|
Im the blue line the black is what most other people where doing
http://img64.imageshack.us/img64/8365/cornerea7.gif A |
My steering goes full left and full right all the way .
A |
I think ill just have to try and slow it down even more into there and see how it goes.
A |
looks like ur carrying to much speed into the corner
|
Thanks southwell. Wonder'd that for a long while.
|
ashley, we were watching your car in the final, the only thing wrong with it was you were going into most corners far to fast, especially the corner you say you were having problems with, every lap was the same way to much speed into the corner then try an brake but to late. the only set-up i would change is move the front shocks on the tower out one hole and 35 weight oil in front.
but biggest change i would make if i was you is slow down=less crashing=faster overall time. i ran my old cells to calm my xx4 down, went up a pinion to normal was one of the slowest cars on the track on the straight but because i didnt crash as the car was drivable i had a good day |
Ash
Looking at that set up, I would suggest the following things; 1. Go up 5wt oil in the rear shocks. 2. Lengthen the front camber link, (so instead of putting it on the middle hole on the shock tower put it on the inner). 3. Regarding speed, well I didn't see your car, but if overgeared you will kill all the bottom end, and find that the power kicks in later on the throttle curve causing the car to accelerate mid corner... which can cause overshooting problems?? But to be perfectly honest, I would try no. 1 and no. 2 first.... Because if the speed feels right for you then it is.. Also regarding throw on the steering, you should always set your steering throw so that it is over the mechanical end stops... approx. 5-10% |
Quote:
The only reason i can think of doing this is to keep the wheels at full lock when at speed, if you need to do this then i would say your servo isn't strong enough. |
However strong the servo is there is still back lash in the steering parts. I totally agree the reason for this, is becuase on power the front wheels naturally want to straighten, and haven that bit of excess will assure you can keep the car in the corner on power..... Basically set it up so the last little bit o movement on your sticks, is effectively like a dead band which the wheels have reached full lock, but as mentioned earlier will make sure when you are on power you can keep the wheels at full lock...
|
I think i need to slow it down a bit im so used to 2wd i can normally throw it in the pretty fast.
A |
Quote:
I always find, a smooth driver is much better than a ragged driver, as it gives you more time to avoid mistakes e.t.c ;) But, if you want to be ragged and turn lots, increase the percentage of steering response ( How quickly it turns ). In a touring car, I have about 60% on carpet, sometimes less due to a open track e.t.c In a buggy I have it at 50% I think. |
Quote:
|
Quote:
|
Lovin the pic ash but to me it looks like your turning after the corner, slow down and make sure you hit the apex!!
Slow is fast:o ;) |
| All times are GMT. The time now is 03:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com