B5 rear arms and hubs on b44.3
 

I seen some pics of b5 rear arms and hubs on b44.3 any one done it if so why thankyou

it can be done fairly simply. the only real mod you need to do is to enlarge the holes on the front and rear rear suspension hangers. you need to use the B5 rear arms not the B5M ones.

you will also need to fit the b44 dogbones to the rest of the B5 driveshaft assembly.

I tried it out mostly because i could, but also using the B5 rear hubs gives more toe in adjustment. or at least cheaper and quicker adjustment.

i ended up abandoning it though as the dogbone is a few mm too long, so sits to far into the outdrive, which i felt was contributing to a fair bit of odd behaviour on landing from jumps (in no way could it have been my driving)

B
 

Thankyou for that I think I will give it a miss then thankyou tho 👍