1:10 offroad ESC setup
 

Looking for advice on programming my ESC (Turnigy) I've got the programming box but I'm not sure what parameters to plumb in as a start point (drag brake, brake force, boost, turbo etc. Motor is a 13.5T. As you can probably tell I'm new to the hobby.

There is a meeting on Sunday. Pop down, somebody will be able to help I'm sure.

Hi

Some basic settings to start with:

Drag brake 10% (amount of brake when you let off the throttle.)
Brake force 100%, so you have full brake when needed.
Boost / turbo etc. off or at zero.

Boost and turbo will make the car faster and harder to drive. When you are starting you want the car easy to drive.
Ask where you are racing I'm sure you'll get help with the settings.

MiCk B. :-)

Thanks :-)