oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   X-Factory (http://www.oople.com/forums/forumdisplay.php?f=16)
-   -   X-6 E Speed camber links (http://www.oople.com/forums/showthread.php?t=10765)

SHY 13-05-2008 02:22 PM

X-6 E Speed camber links
 
1 Attachment(s)
http://www.xfactoryrc.com/Images/ESB...dExtenders.jpg

This is a great idea. But the mounting holes are bigger than the 4-40 screws, so they tend to rotate. I put one countersunk screw in place for one of the holes, which helped some. And I could grind them down to fit both holes, which would hold it perfectly in place.

Attachment 2846

But something tells me Big E has a simple and effective solution?

telboy 13-05-2008 09:38 PM

I just used a couple of M3 8mm screws for each side.
Just right.:thumbsup:

SHY 14-05-2008 01:10 PM

Quote:

Originally Posted by telboy (Post 123653)
I just used a couple of M3 8mm screws for each side.
Just right.:thumbsup:

But then you drilled/tapped the plastic to 3mm as well first?

Big E 14-05-2008 02:14 PM

To be honest I never had an issue with them moving, just tightened them up??

E.

SHY 14-05-2008 02:45 PM

Yes, that's a point. But us amateurs tend to crash which still easily moves them :lol:

I'll just take some countersunk screws, put them in the drill, and then grind off some. That way I can fit two beside each other and it'll stay put.


All times are GMT. The time now is 03:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com