oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   What servo do you use? Tenth Off-Road (http://www.oople.com/forums/showthread.php?t=113441)

V6Jim 25-10-2012 08:00 PM

What servo do you use? Tenth Off-Road
 
Looking to find out what the best, good value servo to use? I bought an Alturn 750MG for £18 and I think I'm regretting it...

Jimmy

OneKiwi 25-10-2012 08:09 PM

Ace 1015
Ace 1313 are great servos
Most of the savöx ones you can't go wrong with and they are a great price
Futaba
Hitec

Servos aren't really something you should skimp on as it makes a noticable difference and get a good one and they can last for ages

rondoolaa 25-10-2012 10:19 PM

i use a team associated 1015, top servo

mart3pop 25-10-2012 10:29 PM

Savox 1257 :thumbsup:

haggis 25-10-2012 10:34 PM

i run a Savox Sc-1258Tg. its been in my b4 for a year now without any issues.

its about the same torque as the alturn but faster.

stick your alturn on ebay. somebody out there will want it!

Dombrasky 25-10-2012 10:38 PM

+1 on the Savox Sc-1258Tg :thumbsup:

V6Jim 25-10-2012 10:45 PM

Quote:

Originally Posted by haggis (Post 707531)
i run a Savox Sc-1258Tg. its been in my b4 for a year now without any issues.

its about the same torque as the alturn but faster.

stick your alturn on ebay. somebody out there will want it!

Just took it apart to see if there was anything odd going on. The gears look lovely quality - all metal and nicely made. However a couple of the gears were rubbing against each other and one was laying flat on part of the plastic casing. Add to this that the whole lot was covered in a very sticky white grease. Very sticky!

So, I cleaned all the white goo off and shimmed the gears so nothing was rubbing and - WOW! Faster, centered well and even noisier than before! Worked though!

I'll still keep a lookout for a replacement. Perhaps a wanted ad would be an idea.

Jimmy

Col 26-10-2012 02:50 PM

I still running a 6 year old KO2123...

BeachBuggyPhil 27-10-2012 09:01 PM

I buy second hand ones off here from people that I trust when they discribe a genuine reason for sale.
Savox mostly but all have worked well.
High speed for my buggy and high torque for my SC10 and crawler.

hotrodchris 27-10-2012 09:06 PM

:thumbsup:savox 1251 in both 2 and 4wd:thumbsup:

mikeyscott 27-10-2012 09:11 PM

Savox 1257 2WD
Savox 1258 FS2
Orion VDS1009 - DB1

Would like to change all to Orion or Sanwa, but ££

I wouldn't choose Savox again

hotrodchris 27-10-2012 09:13 PM

Why Mikey so far in both 10th and 8th never had an issue with Savox but have had more expensive ones that have only lasted 5mins?:woot:

discostu 27-10-2012 09:15 PM

Savox 1257 or 1258tg

I've had the 1257 since 2007 when they first came out it has never stripped a gear or ever gone wrong this servo is fantastic.

It even survived snapping the front off my dex210 last weekend with no servo saver

If I remember correctly I paid £35 for it as a cheap temporary replacement for a broken futaba I've still not sent it for repaire.

Stu

RogerM 29-10-2012 01:26 PM

All my cars have Futaba BLS551 servos in, great servo for the money!

Wouldn't touch SAVOX with somebody elses poopy stick, personally don't think the 1251 has enough REAL torque to steer a 4wd buggy and seen LOTS have problems over the years.

I know people who haven't had problems with SAVOX so maybe the quality part-part is the issue.


All times are GMT. The time now is 07:17 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com