oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Vintage RC (http://www.oople.com/forums/forumdisplay.php?f=48)
-   -   rc car unknown make/model (http://www.oople.com/forums/showthread.php?t=120094)

Fezzers 21-01-2013 06:18 PM

rc car unknown make/model
 
4 Attachment(s)
hi im new to the site, im just getting back into the rc scene and im after some expert advice. I've recently purchased an old rc car, unfortunately it's in need of repair in a few areas I was planning on restoring it. The problem I've got is that I don't no what model it is or how old it is. Long shot I no. I've attached some photos of it it seems to have a hard plastic chassis that's slightly see through any help would be greatly appreciated. Thanks Will

AndyG 21-01-2013 06:21 PM

Tamiya Super Hotshot I would say, with some non-standard chassis parts.

Good luck with the restoration !! :thumbsup:

racingdwarf 21-01-2013 06:25 PM

yer, few of them about, cant remember who made the convo kit TMS or SRM? good find tho would make a nice restored runner

JohnM may tell you more if he finds this post as he has a runner he uses here in vintage classes at boughton

neallewis 21-01-2013 06:37 PM

The demon power products stickers might be a clue?

CHEVY 21-01-2013 06:41 PM

tamiya hotshot with srm chassis conversion my cousin used to have one

terry.sc 21-01-2013 07:59 PM

Tamiya Supershot with TMS chassis, first released in 1986.

Body,wing and roof are Supershot. 4 shock setup is Supershot.
Chassis was made by TMS, I've got a NIP one , here's a picture. Front bumper is also a TMS upgraded part. It's also fitted with the CRP upper wishbone support, the red part at the front.

The SRM chassis was aluminium and looked like this one.

Spares to restore it shouldn't be a problem. Tamiya re-released the Supershot last year, renamed as the Super Hotshot, so spares should be available.

racingdwarf 21-01-2013 08:32 PM

Quote:

Originally Posted by terry.sc (Post 736047)
Tamiya Supershot with TMS chassis, first released in 1986.

Body,wing and roof are Supershot. 4 shock setup is Supershot.
Chassis was made by TMS, I've got a NIP one , here's a picture. Front bumper is also a TMS upgraded part. It's also fitted with the CRP upper wishbone support, the red part at the front.

The SRM chassis was aluminium and looked like this one.

Spares to restore it shouldn't be a problem. Tamiya re-released the Supershot last year, renamed as the Super Hotshot, so spares should be available.

As always our oople museum curator is on hand with even the dates,you really need to get out more tho:lol:,

racingdwarf 21-01-2013 08:34 PM

Quote:

Originally Posted by neallewis (Post 735991)
The demon power products stickers might be a clue?

they were quite possibly one of the coolest stickers of their time...but mostly for motors and esc's and bits

SimonW 21-01-2013 08:58 PM

Could be a hand built chassis! back in the day Model Cars Monthly as it was back then did an article which had cut out templates so you could make your own chassis out of fibreglass for the Hotshot. Anybody remember that?

Paul Field 21-01-2013 09:41 PM

My Best friend at school made one for his school project from the Model cars monthy plans.
He may still have it. I think his name on here is NDP. I'm sure he'll post on here in a minute.

Npdp72 21-01-2013 10:13 PM

Paul's very nearly right!

I did make a GRP chassis for my Hotshot, and I do still have it in the loft, but it was to my own design (inspired by model cars monthly probably), very similar side plates to one pictured here but with a wide GRP bottom chassis plate and alloy rails to join it all together.
Mine was the original Hotshot but with Tamiya option independent shocks, it may be rose tinted specs but I seem to remember it went quite well!
(I also made another for a fellow club racer in Devon)

It will probably take me a few days to find time, but I'll try and dig it out of the garage and post some pics.

terry.sc 21-01-2013 10:28 PM

Quote:

Originally Posted by SimonW (Post 736088)
back in the day Model Cars Monthly as it was back then did an article which had cut out templates so you could make your own chassis out of fibreglass for the Hotshot. Anybody remember that?

I posted the article here a while ago
http://www.tamiyaclub.com/article.asp?id=102

If we are talking about Hotshot conversions, here's mine
http://www.tamiyaclub.com/showroom_m...=56434&sid=297

Paul Field 21-01-2013 10:37 PM

Quote:

Originally Posted by Npdp72 (Post 736129)
Paul's very nearly right!

I did make a GRP chassis for my Hotshot, and I do still have it in the loft, but it was to my own design (inspired by model cars monthly probably), very similar side plates to one pictured here but with a wide GRP bottom chassis plate and alloy rails to join it all together.
Mine was the original Hotshot but with Tamiya option independent shocks, it may be rose tinted specs but I seem to remember it went quite well!
(I also made another for a fellow club racer in Devon)

It will probably take me a few days to find time, but I'll try and dig it out of the garage and post some pics.

I'm glad i can remember it at all as it was nearly 25 years ago!

terry.sc 21-01-2013 10:56 PM

Quote:

Originally Posted by racingdwarf (Post 736070)
As always our oople museum curator is on hand with even the dates,you really need to get out more tho:lol:,

It helped that I was working for a model shop through the 80s, I built and repaired most cars and raced against the rest. Can't remember what I had for dinner last night though.:lol:

Fezzers 22-01-2013 10:25 AM

cheers guys, hell of response.:thumbsup: now to source some new parts, any idea where the best place to get them from online? i need new front hubs as the threads have been stripped out of the top! also looking for a shell, servo, uprated motor and converting to esc rather than the old resistance board. will take some photos as i go along and keep you posted. look forward to seeing your pics Npdp72.

terry.sc 22-01-2013 09:40 PM

You can find the manual for the rerelease on Tamiyas website
http://www.tamiya.com/japan/download/rcmanual/58517.pdf

This will give you the part numbers, the most useful information you need for searching for parts.

The front uprights are a standard Tamiya part, used on dozens of cars so easily found, for example at Modelsport. UK shops stock some of the parts, but most parts will only be found on ebay.

You won't find the body in regular UK shops, but it can be found on ebay, example 1, example 2 and at RCMart.
Because the rerelease had a different sticker set, the original stickers are more expensive. You can get repro stickers but all the decent sticker makers stopped making them after Tamiya claimed copyright infringement on them.

Npdp72 27-01-2013 05:06 PM

Hotshot
 
5 Attachment(s)
Pics of my conversion as promised...


All times are GMT. The time now is 10:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com