C4.1 rear suspension brace CREAM EXTREME R.C.
 

NOW AVAILABLE IN BLUE....

http://img.photobucket.com/albums/v4...ps9981f41b.jpg


NOW FOR SALE....
kit is £35.00 inc. both braces and 4 pivot balls.

replacement pivot balls will be £4.00 for a set of 4 and are made from stainless steel.

.................................................. .................................................. .................................................. ......


Quick preview of the Cream Extreme R.C. rear suspension brace that is all but ready to come onto the market...


view with original parts
http://img.photobucket.com/albums/v4...eamExtreme.jpg


two sets shown with and without pivot balls in place...
http://img.photobucket.com/albums/v4...eamExtreme.jpg


Machined from High tensile grade aluminium, and including pivoting ball joints. A direct replacement for the original parts with 1 and 2 degree off sets. A light modification to the chassis will be needed to clear the beefed up back end, But it's only a few seconds with a file or a dremel. Hope you like them...

Cheers Noel

Had a few PM's about these. So better add a little more information..

Price..

I'm hoping the kit will come in at £35.00 inc. both braces and 4 pivot balls.

replacement pivot balls will be £4.00 for a set of 4 and are made from stainless steel.

Hope to have them for sale in about a week or so.

If you want to pre-order/reserve a set if you post on here or send me a PM. I'll reply to your PM when they are ready.
Any that have been pre ordered I'll reserve for 1 week from me replying to your message telling you that they are in stock.

Postage is Royal mail signed for.
U.K. £2.35
Europe £8.45
outside Europe £8.95

Payment will be via PayPal. Which I'll PM you when I send the message saying they are in stock. This is purely to stop people sending me random money that I then have to hunt down what it's for (believe me it happens)

Cheers
Noel

A few picture of it installed on Chris Evison's car..

http://img.photobucket.com/albums/v4...s/Img_3959.jpg

http://img.photobucket.com/albums/v4...s/Img_3963.jpg

http://img.photobucket.com/albums/v4...Img_3964-1.jpg

Now officially for sale...

@ £35.00 for the kit and £4.00 for a set of extra ball joints.



MOD. NEEDED....

http://img.photobucket.com/albums/v4...rts/c41MOD.jpg

2 minutes with a file.
Just to clear things up, THe mod is just the 2 chamfers on the edge, Not the slot in the middle. This is a Tony Parr chassis and the slot is for a different mod I belive.

Cheers
Noel

Just wanted to say a Big Thanks to Noel of Cream Extreme R.C.
for his fantastic rear suspension brace and Extremely good service
Thank you

http://www.oople.com/forums/picture....pictureid=5848

http://www.oople.com/forums/picture....pictureid=5849

Bong, Is it sat down properly? Hard to tell but it looks like it's a little up on those images. Make sure you have given it plenty of clearance.

Hi Noel Yeh it's all seated properly just the under-tray in the pic's make it look like it's not
Thanks again

Si

I cannot find the standard Centro parts on JEMODELS. What is the price / performance advantage of these Cream parts?

Neil

Hi Neil,
The price for the kit, i.e. front and rear braces and 4x hinge balls is £35.00
replacement balls (set of 4) are £4.00 just in case you flick one across the field ;)

It sorts out the problem of wear and play in the rear end of the C4.1, Comes with the standard 1-2 deg. offsets but with washers/spacers this can be altered to different angles without worrying about the hinge pins restricting movement.
As a bonus cost less than the replacement standard parts (£35.49 for the pair).

Hope this answers your question.

Regards
Noel Grundy

Yes, thank you. If these parts reduce wear then this is a big advantage as my current C4.1 does have significant play in the rear braces.

**
 

Neil i have one fitted and will show you at kiddy but excellent idea

Jamie

NOW AVAILABLE IN BLUE....

http://img.photobucket.com/albums/v4...ps9981f41b.jpg

Could the mod for this be done on the carbon chassis?

I don't see why not, It's only two small chamfers to the back edge.
As always with carbon though, Make sure your in a well ventilate place, preferably with a mask on.

Nice! Not trying to thread hijack but do you do something like this for the X6 Squared?

Sorry no, Nothing for the X6 squared.

SPECIAL OFFER, UNTILL THE 08/09/2013

PRICE REDUCED TO £25.00 FOR THE SET.

A few gone over the last couple of days, Only four and a half hours left at this price :woot: