BL Mini Leo-X (Atech)
 

So far i have only been running this little beast with Stock chassi and DynoMAX 8000rpm/v motor and a TEKIN Mini R esc.

On my Mini FOFF there is a few upgrades...

- Ball bearing on the whole car
- Orginal option parts Wheel axles (app 10mm wider on each side) alu hex, can use other hex to..
- Orginal option oil alu dampers
- CF strength motor mount,the stock one flexes to much, so a little cf plate between motor and mount is placed for less flex
- AE RC18 11T piniong
- 2s2p 1800 mah 7.4 lipo
- Wheelie bar.

Padeltires will be ordred soon
The car is real fun to drive, and i havnt had any prob with my tranny. But everything that´s mounted on this car, like the ESC,Rx etc makes the CG way to high, but that is a later Q.

I have now Stretched the car 20mm total,maybe that can help me when im FOFFing

The car (before stretch)

http://i123.photobucket.com/albums/o...0080809423.jpg

Now it is time to get some done...

http://i123.photobucket.com/albums/o...X/DSC_0034.jpg
http://i123.photobucket.com/albums/o...X/DSC_0050.jpg
http://i123.photobucket.com/albums/o...X/DSC_0049.jpg

stock upper link place

http://i123.photobucket.com/albums/o...X/DSC_0045.jpg

Streched

diff length, "upper link" moved out 10mm

http://i123.photobucket.com/albums/o...X/DSC_0046.jpg

Done..

http://i123.photobucket.com/albums/o...X/DSC_0057.jpg
http://i123.photobucket.com/albums/o...X/DSC_0059.jpg
http://i123.photobucket.com/albums/o...X/DSC_0060.jpg
http://i123.photobucket.com/albums/o...X/DSC_0061.jpg