shell protection
 

Hi all

Used to back my shells with nitro block but not sprayed one for 12months or so, what are you all using to weather protect your shells now?as nitro block seems off the menu now! shells painted with RCS (john miller paints) paints and fastcolour.

I use Valspar clear coat from B&Q, works well.

Halfords Clear lacquer works a treat, two light coats when the paint is fully dry

I buy grp tape. Works brilliantly plus stops the shell splitting.

I agree completely (also "carplan" clear lacquer works) although I will just say that I have had 2 occasions where the application of a solvent based lacquer onto a water based paint (even when dry) caused the paint to "crack & wrinkle" and have a crazed type effect. To get around this I now apply the lacquer to a warmed shell (I give it a blast with a hairdryer before spraying the lacquer) and then try to dry the lacquer itself as quick as poss (also with hairdryer). Since doing this I have had no more problems

There is a couple of nitro blocks out there LRP and Core

Thanks everyone, I had a can of halfords clear laquer in the shed so as advised I heated the shell first then sprayed light coats then used the hairdryer again, worked a treat no problems at all:thumbsup:

Excellent, glad it worked for you

lrp nitro block
 

Lrp also do a nitro block works a treat