reedy lipo in b4
 

Can some one tell me please how you fit a reedy 5000 lipo pack into a b4

The battery strap will not go under the tower .

This might help....??

http://www.oople.com/forums/showthread.php?t=14725

nah it dont

it will fit if you have the carbon brace................

failing that and if you add lead sheets...you need to dremel the bottom of the tower away and add a small sheet of carbon above the tower to strenghen the area. this will give you enough clearance to run it with a standard brace.

another more simple way of acheiving it is use a strip of lexan and just mount it accross the two clip pins. this holds it it, but can jump up and down at the rear a little.

Lee

I just put the strap in the bottom triangle of the shock tower and take up any slack with a small piece of foam between the lipo and the battery strap - works perfectly .

I thought as much with the tower,I shaved a little off the tower and the plastic brace last night but stoped and thougth i best ask if this is right befor i naff up my new car

Milzy, I never had a problem at all it just slotted in, I just ran the pack upside down so the flat side was at the bottom of the chassis.

don't remove the hard casing like I did to fit in the TC as it goes bang :p

haha you nut