oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   X-Factory (http://www.oople.com/forums/forumdisplay.php?f=16)
-   -   xx4 WC & xxx4G (http://www.oople.com/forums/showthread.php?t=23695)

carlin 08-05-2009 09:02 PM

xx4 WC & xxx4G
 
Hi Guys,

I have both these cars now, was thinking in few months swapping over to the X5 SQ
But which car is best to use, I know on DMS racing they have upgrades for both, but price diff is amazing.

The most of the cars ive seen in pics look just like the XX4 WC layout.

Thanks

super__dan 08-05-2009 09:18 PM

The price difference is because the X5 is based on the xx4 so uses more donor parts in the conversion. So the xx4 conversion has to have new towers, wishbones, bulkhead, toe in blocks etc etc, all of which you'd already have if you have a xx4.

Paul_Sinclair 08-05-2009 09:25 PM

Quote:

Originally Posted by super__dan (Post 239018)
The price difference is because the X5 is based on the xx4 so uses more donor parts in the conversion. So the xx4 conversion has to have new towers, wishbones, bulkhead, toe in blocks etc etc, all of which you'd already have if you have a xx4.


I think Dan means the XXX4 conversion in the part I made bold above. Dan's right, the X - 5 is based on the xx4 and we only offer a conversion for the xxx4 because people ask. The price difference in the kits represents the cost of the (many) additional Losi parts we have to provide.

dave-p 08-05-2009 09:32 PM

x5
 
ROB WHICHEVER YOU USE YOU WILL ENJOY THE END PRODUCT ITS A GREAT CAR.

carlin 09-05-2009 04:11 PM

So if i got xx4 thats best way to go i.e. saving on cost's?

Paul_Sinclair 09-05-2009 10:11 PM

Yes, from a cost perspective, starting with a xx-4 (any motel) is far cheaper than starting with a xxx-4. If you have a xx-4, you want the K012 Conversion Kit. If you have a xxx-4, you want the K003. Either way, at the end you will have the exact same car.

carlin 10-05-2009 05:20 PM

Also is thier any other bits that are recommended that doesnt come with the kit?

jono83 10-05-2009 07:31 PM

Quote:

Originally Posted by carlin (Post 239355)
Also is thier any other bits that are recommended that doesnt come with the kit?

e speed steering parts and shock tower braces would come top of my list

pro4nut 10-05-2009 07:35 PM

The car is fine as is,
i would recommend the following in no particular order as funds allow,
Carbon fibre front and rear shock tower braces
Carbon fibre rear tower brace for the camber link mounts.
Carbon fibre steering link.

All available as one kit from DMS.

Would also suggest the x factory upgraded pivot pin screws for the front wishbones.
A front one way.
XXXcr rear hubs and wishbones

hope this helps

Garry Driffill 10-05-2009 08:24 PM

Quote:

Originally Posted by carlin (Post 239355)
Also is thier any other bits that are recommended that doesnt come with the kit?

If youre going to run LiPo stickpack in the car id reccomend using the Schumacher CAT SX strap!

Darren Boyle 10-05-2009 08:31 PM

Quote:

Originally Posted by Garry Driffill (Post 239425)
If youre going to run LiPo stickpack in the car id reccomend using the Schumacher CAT SX strap!

We have a specific LIPO battery strap on its way for the X5, should be here any day now!!!

carlin 10-05-2009 08:45 PM

Thanks for all the advise guys

Going to save bit of cash now take month or two, got little one due in 3wks so that take sometime away & money lol...........:lol:

dave-p 10-05-2009 08:48 PM

x5
 
rob ring the number i gave you all the hop-ups were in stock last week.

Paul_Sinclair 11-05-2009 12:18 AM

No one has mentioned this, but the #1 thing for all X - 5s, + xx-4s is the caster block screws. Far more important than any other mod, they will save your front arms repeatedly and are not nuch more than a pair of arms. Once they save an arm, you're even, and on the third arm you're ahead!

Not to mention finishing 3 races where you would have DNFed.

Darren Boyle 11-05-2009 01:00 AM

Paul they were mentioned in post 9 :blush: (since I was going to mention them too)


All times are GMT. The time now is 12:36 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com