oOple.com Forums - what hex set ?

oOple.com Forums (http://www.oople.com/forums/index.php)

- Ansmann Racing (http://www.oople.com/forums/forumdisplay.php?f=81)

- - what hex set ? (http://www.oople.com/forums/showthread.php?t=31208)

rc_dan

28-09-2009 09:22 AM

what hex set ?

after a hex driver set, looked in the manual cant seem to find sizes.

does any on no what sizes i need ?

1.5 2.0 2.5 3.0 ?

sparrow.2

28-09-2009 09:50 AM

You will need a 2.0mm for most of the build and a 1.5mm for pinions. A 2.5mm will come in handy for motor screws and the like.

3.0mm is not needed for the Ansmann.

rc_dan

28-09-2009 09:52 AM

cheers mate :thumbsup:

Paulmay79

28-09-2009 01:17 PM

Quote:

Originally Posted by sparrow.2 (Post 292156)

You will need a 2.0mm for most of the build and a 1.5mm for pinions. A 2.5mm will come in handy for motor screws and the like.

3.0mm is not needed for the Ansmann.

It is mate the cap heads that hold the motor on are 3mm.

All times are GMT. The time now is 11:15 AM.