oOple.com Forums - speed passion lpf

oOple.com Forums (http://www.oople.com/forums/index.php)

- Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)

- - speed passion lpf (http://www.oople.com/forums/showthread.php?t=37943)

dave-p

19-01-2010 10:00 AM

speed passion lpf

need a bit of hep here guys, i have lost my instruction manual so i need to know the wiring for a brushed motor, any help would be appreciated, cheers .

col300

19-01-2010 10:07 AM

The manual can be downloaded from the SP website: -

http://www.speedpassion.net/uploadfi...552gt20pdf.pdf

:thumbsup:

bigred5765

19-01-2010 10:09 AM

looking at the wireing end of the can bLue is Left oRange is on the Right yellow is middle

dave-p

19-01-2010 10:20 AM

lpf

its the brushed setting i am after carl.

bigred5765

19-01-2010 10:53 AM

Connected with sensorless brushless motor

When using brushless motor without Hall Sensor, the #A, #B, #C wires of the ESC can be connected with the
motor wires freely (without any order). If the motor runs in the wrong direction, swap any two of the three motor

wire connections.

sparrow.2

19-01-2010 11:27 AM

I've had two mates LPF speedos self-destruct when hooked up to a brushed motor, so be very wary of trying it.

Make sure you set the correct mode on the speedo as it will not automatically recognise the brushed motor.

These instructions are for the venom speedo which is the same as your 1.1 LPF. Speedpassion 2.0 speedos don't do brushed.

http://www.venom-group.com//mmVENOMG...structions.pdf

bigred5765

19-01-2010 11:46 AM

DUDE PAGE 4-5 BRUSHED SET UP AND WIRING INSTRUCTIONS

All times are GMT. The time now is 12:43 AM.