Speed Passion GT2 settings
 

Hi guys,

Just wondering whether people fancy sharing the profiles they've got on the above speedo....

STANDARD.

helpful

Think Lee means dont touch as its so good out of box TBH

I guess you're pretty much just talking about the punch and timing mainly?

I usually run between 3 and 5 on the punch settings and outdoors I run the timing on 8, but indoors its down to around 4 or 5 since the track is quite small. That's with a 5.5 and 7.5 v3 motor. I found punch 1 almost laggy and punch 7 was very aggressive.

best thing is to just go with whatever it comes with and play with it

std set up is
1=1
2=3
3=1
4=7
5=3
6=1
7=2
8=1
9=8
10=1
all we change is setting 2 drag brake we set to 2, setting 3, low voltage we set to 4, 3 volts and then change punch and torq to suit the track

and 10 to 2 for thermal protection ( I think )
if you're not sponsored :woot:

better, cheers guys.

What do you do with regards to the timing on the motor itself Lee?