oOple.com Forums - Problems with glitching

oOple.com Forums (http://www.oople.com/forums/index.php)

- Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)

- - Problems with glitching (http://www.oople.com/forums/showthread.php?t=38691)

Jamie B4

26-01-2010 11:55 AM

Problems with glitching

As mentioned above have a problem with glithching and just wondering if anyone has had any problems. Only thing that I have changed recently in a Novak motor from a light to a R. Is there anything else to check? When it goes its usually after a jump and it loses power from the motor but not the servo then after a second or so just carries on as normal.

Any help guys?

RogerM

26-01-2010 12:27 PM

I had something similar before Xmas @ PDA and it turned out to be the signal wire on teh speedo to reciever lead, fitted a new lead and no problems now (touch wood)

Battle_axe

26-01-2010 12:54 PM

Quote:

Originally Posted by RogerM (Post 336313)

I had something similar before Xmas @ PDA and it turned out to be the signal wire on teh speedo to reciever lead, fitted a new lead and no problems now (touch wood)

running a RB5 right? that was a bit weird when i was marshaling it just seemed to stop then shoot off

RogerM

26-01-2010 02:00 PM

That was it ...

As I say turned out to be an internal break in the signal wire ... the shooting off bit was me leaving the throttle on and willing it to move again!!! :D

Battle_axe

26-01-2010 02:26 PM

Quote:

Originally Posted by RogerM (Post 336346)

That was it ...

As I say turned out to be an internal break in the signal wire ... the shooting off bit was me leaving the throttle on and willing it to move again!!! :D

ha ha well im glad you got it sorted

All times are GMT. The time now is 12:55 AM.