xx4 one way
 

hi,
ive got an alli xx4 one way lesro apex whoever makes them with xx4 pulley fitted,what will i need to make it fit the x5,
just ordered the x5 squared conversion,
thanks
trekkker

Stuart,

You will just need to change to the X5 pulley as it has one more tooth and you will be away!!

E.

If it's a Lesro one just ring Daryl and He'll know.

If it's an Apex one it will have to be modded as the flange on the XXX-S was much bigger so it mas to be machined down.

its a fit for a xx4,
got it off ebay,
so just change the pulley,
will the x5 pulley just fit or will it need modding
thanks
trekkker

Hi Trekkerkk,

I'm affraid you will first have to increase the center diameter of the X-5 diff pulley and then decrease just a little the flange because the XX-4 front diff pulley inside diameter is larger than X-5 diff pulley inside diameter (that's the mods I've made for Antoine's one-way)...

Hope my English is clear enough :D

Olivier

Hi Olivier, your English is better than most of ours!

I have created a word document with step-by-step instructions for how I alter the XXX4 Apex/DCR one way to fit the X-5, I can email this to anyone, but it may be different to the XX4 specific diff, I haven't had one of these to compare.

Chris

thanks to all for the info,
trekkker

Thanks Chris !

Please to see you again next week ;)

Cheers

Oh we'll be there probably tea time on Wednesday, I hope the rain doesn't follow. See you there. :)

You can take the rain Chris, please do. I don't want to get wet at the F1GP @ Silverstone. I remember the car parks from a few years back... not good.

:D a bit boggy?