spektrum sr3000 receiver problems
 

hi guys just bought a dx2 set that came with a sr3000 receiver.

ive bench tested it and was fine so slapped it in my car but when i try to accelerate it cuts out.ive checked esc and motor but the led goes off on the receiver and esc seems fine.im running a ko propo vfs-1 esc with a 19turn stock motor.

could it be nackerd or is it something to do with the voltage on it?

i would be very greatfull for any info thanks ian

I think you may need one of these http://www.apexmodels.com/gbu0-prodshow/SPM1600.html

Josh

thats what i was thinking ive been looking last night on google for info and thats what a lot of people were sayin.

ive checked motor changed brushes and lowered the gear ratio bigger spur smaller pinion but still doing it not as much tho so with 1 of the caps on it im hoping i should be prblem free.

thanks dude.

post or link to a pic of your install

will do just ordered some capacitors of ebay.should be here wed thurs so will get them soldered up and fitted and will add a pic then.

hi guys ive sorted the problem now with my home made version of a spektrum capcitor.

cost a quarter of the price got them off ebay item 360168840784 price for 2 only £1.50 spektrum 1s bout £7!.

just soldered on an old battery cage plug and away i was no problems what so ever!

i apologise for the picture quality cant fine my memory card for camera so had to do it with my pants phone.