oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Schumacher (http://www.oople.com/forums/forumdisplay.php?f=46)
-   -   Cougar slipper adjustment... (http://www.oople.com/forums/showthread.php?t=45447)

simoncrabb 03-05-2010 11:51 AM

Cougar slipper adjustment...
 
Is there an easy way to adjust the slipper, I can't get a box wrench tool in there with the shock on...

Do I need to cut the plastic cover down so I can use a 5.5mm spanner? But leave enough material on so the rubber cover goes back on?

niggs98 03-05-2010 11:56 AM

in a word yes

simoncrabb 03-05-2010 12:48 PM

Cool, where's me dremel?

Jonesy 03-05-2010 02:59 PM

Quote:

Originally Posted by simoncrabb (Post 373220)
Is there an easy way to adjust the slipper, I can't get a box wrench tool in there with the shock on...

Do I need to cut the plastic cover down so I can use a 5.5mm spanner? But leave enough material on so the rubber cover goes back on?


As Nathan said that is the way to do it!! We've cut off the end of the cover and once this is done it is easy to get at it with the smaller spanner

Tom3012 03-05-2010 09:18 PM

Any pics ?

bigred5765 03-05-2010 10:24 PM

3 Attachment(s)
here you go
first pic is cap of un cut:woot:
second pic is cut:woot:
third is cap back on but not all the way on:o
as you can see in the second pic its easier to get at the nut even if the shock and drive shaft are in place


All times are GMT. The time now is 07:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com