Removing superglued parts
 

I'd like to remove some carbon fibre lipo locators from a Demon lipo I have. They've been superglued on.

I had a go with nail-varnish remover with no success. I could try and prise them off with a screwdriver but I'm a bit nervous of damaging the lipo case. The only other thing I thought of was to grind them away with a dremmel.

Any other ideas?

Cheers,
Barry

Acetone is the only real way to remove superglue.

If you try and pull them away from the lipo then you will probably damage the lipo case as superglue+carbon fibre is going to be stronger than the plastic lipo case.