Cleanin out shocks
 

Guys,
What's the best liquid to use to flush out my shocks fully, due to some dodgy orings I have water and dirt in a set and want to give them a proper clean, is water ok if I let them fully dry after?

motor cleaner them dave:thumbsup:

pop the o-rings out, and blast away with brake/motor cleaner

I got myself one of those little ultrasonic baths from HK Dave. I use Wurth brake cleaner in mine.

http://www.rc-mushroom.com/product_i...ducts_id=16471


http://cgi.ebay.co.uk/Wurth-Brake-Cl...item3a5c0c9ff1

I use either Carb or Brake cleaner, whichever I get my hands on. It's only £1 a tin from lots of places!

Cleaner
 

WD40 you can't beat it.

isopropyl alcohol, very similar to motor cleaner, meant for cleaning circuit boards and contacts

Wurth Brake Cleaner :thumbsup: Makes life so much easier :D

WD40 isn't a cleaner, it's an oil, and will leave a residue (albeit small) which will contaminate the shock.

Motor spray or similar is the stuff to use. Or soap and water!

brake cleaner is the best,just make sure as said you take out the o rings as it will knacker them very quickly,also make sure your not looking down the shock when you do it coz it blows back in ya face:woot:........its horrable:thumbsup: