transponder and sr3300t
 

going to be getting a PT on payday and have a sr3300t currently using ports thr, str and aux, this leaves the bind, lap, temp, rpm ports free, can I plug in a PT if so where do I plug it in? have a voltage cap in the aux which is a must.

thanks.

Bind because the other ports are only 3.3v so probably won't have enough power.

Can anybody else confirm that this is correct and the bind port will be ok to use.

Don't use telemetry ports. As stated above they are 3.3v. Just use bind port (i use aux but i have battery in bind)