novalink
 

any one having trouble getting the novalink to talk to the speedo? i had it working but think my avg may be blocking it!

at which point? sometimes unplugging and replugging it at the receiver restarts it

have it all pluged in and nothing even tried unplugging and plugging

Are you on windows 7? I struggled with mine until someone said to run the compatibility mode and run as win XP, then was fine.

im xp its odd it worked and updated the firmware, conected on the connection tester and now nothing, it sees the novalink, bit does not work the speedo, tho the speedo works in the car!

when i connect novalink to the usb it flashed red then goes green.
connect speedo and nothing

Sorry I'm out then. You have disconnected the fan though haven't you?

Email Novak tech, they are very helpfull.

yup, i take it thay as you to do that so the usb adapter is not overloaded, u at worksop tomoz?

got this from novak, and it cured my problem

Here's the walk through that has been working.

Remove all Novalink from hard drive (drive C) and from documents section.

Download from Novak site "Novalink_Software_1.4.zip" under the Novalink Software on home page.
You must hit "Save" instead of "open". Hit "save" again to begin saving process.

After program has saved hit "open" to open saved files. Go to "Drivers" and "Extract All". After the drivers are extracted you need to hit "drivers" again to installer drivers onto computer.

Plug in USB cord into USB slot on PC before installation of drivers. Driver installation will begin.

Update The NovaLink Device
Download Novalink_Device_Updater.zip from Novak site.
You will need to hit "save" instead of "open". After saving then hit "open" to open file. Unzip file and hit "update" on pop up window.
Plug and then unplug USB so the Device drivers can be installed. Hit "close" to close pop up window and finish installation.

Then select "Installer" on Navalink 1.4 then "dataI" hit "run" to begin installer of Novalink 1.4. Close after installation.

Go to Novak homepage to download "Kinetic Firmware".
Download Kinetic_Firmware_1.4zip (Self-Extractor).
Hit "save" then "open". Double click to unzip file.

Download Kinetic_Firmware_1.4zip (Standalone RDD File) Hit "Save" then "Open". This will bring up "outloada14.rrd" you need to move this file from the "documents section to the NovaLink file on Drive C. To do that you will need to open "Computer" under the Start menu. Choose Drive C then "Program Files" then "Novak Electronics". This will bring you to the "NovaLink" file folder. You will need to drag and drop the outloada14.rdd file to the "NovaLink" file foler.
Go to the "desktop" and double click the NovaLink icon to bring up NovaLink. Choose the "Launch Firmware Updater" icon on the top left of the NovaLink page. Plug in ESC and let NovaLink take care of the rest!