B6 Style power supply
 

Hi guys,

Wondered if you might mind helping me out? I've been looking at the B6 style chargers - I'm sure you all know the type, but something like this if not :http://cgi.ebay.co.uk/HobbyKing-ECO6...#ht_1004wt_905

They all seem to come without a power supply, and just say input 11-18v. Does that mean any power supply that falls within those voltage limits?
For example, I have an AC adapter here that looks like the right plug on it. Rated output is 12v..._, 800mA would that do?
Or if not, what will?
Theres a few specific ones on ebay but all are from HK, and not much info on what the exact output is...

Thanks in advance

You'll need a power supply that gives out 5 amp minimum.

800ma just is not enought to charge the pack at anyhting more than 1 amp.

MiCk B. :-)

Ah, I thought that may well be the case.
So anything that's 5A and between 11-18v?

What's the best cost effective option?

This http://www.logicrc.com/Default.aspx?...00&&s=c:0,c:40

We use something like this on a cheap B6 : http://cgi.ebay.co.uk/12V-5A-Imax-B5...#ht_1261wt_906

Works OK, but Mark's power supply looks good.

JC, is this the same but from the uk? looks the same to me.....
http://cgi.ebay.co.uk/New-12V-5A-TFT...#ht_6515wt_905

Looks the same to me, ours has 'LCD' on it, but - usual disclaimers ;)