CODE Transmitter throttle spring return
 

Hi

I have a CODE DSSS 2.4G stick transmitter that since racing on Sunday has lost the spring return on the throttle. I guess it must have been knocked in my pit box but I do not know how to return to spring return so it goes back to neutral.

Any assistance would be great.

All sorted, the stick must have been knocked slightly and was binding on the side. Managed to slide over slightly to create an even gap and spring return is back.

Must get a proper bag to transport it in.

is it stiff?try pushing the stick to 1 side then the other (not too much force dont want to brake it)if that doesnt work take the back off and look were it mounts inside the pivot will have popped out.mine did it after the misses dropped it and claimed it wasnt here

Unless you can remove the stick unit from the front you will have to open the radio from the back and refit the spring. Checkit against the working stick to see where the spring ought to be.

lol bang on

Brilliant, 3 answers within a minute :thumbsup: