WHEELS
 

Hey guys quick question anybody know if b4 wheels will fit mad rat?? or maybe Schumacher U3756 front wheels :confused: cheers

Think you'll also need the AE 'C' hubs and steering arms! And i believe you'll have to drill them out (to 3mm) to accept the Ansmann pins ;-)
No idea about the Schumacher wheels! Nit hear of anyone running them.

Correct, although you dont need the c hub, just get the steering block and drill it to 3mm..

Rears will also fit if you take the hex off and space the pin out with some washers
:thumbsup:

Thanks for clearing that up Tom :blush: ill keep a eye out for some myself then lol

Didn't think he rears would fit as good!!
So what's the difference between the MR drive shafts and he option ones for AE wheels (apart from the spacer)?

Im not 100% but the optional AE fit axles i think are slightly bigger in diameter, the standard ones arent quite big enough (in theory) so theres a very very small amount of wheel wobble, if you put a corally tube over the standard cvd it gets rid of the problem but the wheels are then a tight....

Ive run AE and losi rear wheels on my car since i got it, just used a few spacers inbetween the hub and the drive pin, no problems yet...

Hope that make sense?

Regards Tom