![]() |
diff movement side to side on sx3
Hi guys
just run my car up the drive and back less then 20ft on some old tyres to bed every thing in before racing, adjusting the diffs i found the diff front and rear move side to side by about 4mm? is this normal? reading the manual and i cant seem to see any spacers/shims for this any ideas ?? |
my sx2 does this too, has caused me no problems and the belts will make the diffs run nice and true
|
just checked mattys there is a small amount of side play 2mm or so
|
do you think its worth getting shims made for this?
will have a real good look after to see how much movement there is, the front moves more then the rear on mine |
never noticde till you mentioned it so i guess no foul no harm ether way
|
Could be why the rear wider belt is fraying and breaking ;) Try shimming it up and see if the belt continues to fray !
|
rear belt breaking??????
ran my car already a lot and there issent a thing to see on the belt. and about 2mm of play so ?????? cant see the problem with some smaal play |
Quote:
|
Quote:
|
do sx2 middle belts break? mine is bloody ancient with no faults what so ever, maybe it's the tensioner causing a problem on the sx3??
|
dont think so i know people running tensioners on there sx2 but yeh weve had a belt go on the sx2
|
Quote:
|
| All times are GMT. The time now is 12:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com