SMC EnerG4600
 

Dose anyone have a part number for these please. Are they available in the UK yet to none team drivers. Lastly has anyone tried them yet if so what are they like.
Cheers Andy

I have some not made up yet, waiting battery bars through the post.

I'll try to post the part numbers up tomorrow when I'm home. Not sure on their status in the UK, will ask about that too ;)

2 versions so far, economy and race.

Economy = SUMEG4606E
Race = SUMEG4606R

I know for a fact that the economy packs have excellent figures.

Ok cheers dan i would be after the race/best packs

Why? We're just using the Economy packs.

Just allways have bought top spec in the past. Is there going to be much price differance? If the economy packs are good enough might get them and save some cash then:thumbsup:

uesd my eco packs at batley on sunday,for the first time:thumbsup:mega:pi would recommend to anyone,team almighty:thumbsup:

This is probably a dumb question to ask but, I'm gonna ask it anyway just to be on the safe side!!
I'v just purchased some 4600mah cells but do you still charge them @ 5amp? Or can you charge them @ 6amp's as they are tested & matched at this rate?!

Hi GPS1,
The official recommendation is to charge at 1C. With 4200mah IB cells due to the risk of explosion, this became a must due to safety.

With 4600mah, the official recommendation is still 1C, but there has been no reports of them going bang. So what you ought to do, is check with the club you are racing at, as they may still require you to charge at 1C, so do so. If not, then it is your own decision to charge at whatever rate.

There is really no need to charge at 6amps tho, you will just over heat the cell and cause it them to age very quickly. If you are worried about speed of charging, the new "breed" of cells seem to hold charge well (I am using EnerG), so I recommend partial charging at home (2000-3000mah) and then peak them off at the track. You don't really need to fully charge them, the car will only use 2000mah per run - so knock them off at 3000mah and they'll be great and the cell life will be hugely extended.

Personally, I am charging at 5amps now, on a Pulsar 3 on linear with delta peak at minimum, 5amps on 4600mah is only 1.09C, and I am feeling that my EnerG cells are awesome for punch and duration & take a little less than an hour to charge from equalised. :thumbsup:

Chris

Hi guys, where are these available from ? I can't seem to find who distributes them in the UK ?

Give the Race Place / Model Images a call, they did have some a little while ago.

CML distribute SMC matched EnerG cells so any model shop should be able to order them.

thanks guys, I'll try those

sorry sold out, new stocks won't be in till mid may

Thanks for your advice Chris!

Stormforce Racing now have stock of the EnerG4600, along side the E-Power E-4500. The EnerG4600 is not on the website yet but please PM me with enquries.

Cheers
Neil

you got pm

and another neil:)

saw neil's cells last night all i can say is there really nice :thumbsup::thumbsup:

A

You have pm :)