[Welshy40]

Originally Posted by alcyon

It fits the chassis and gearbox well, diff bearing tolerance is perfect. The gear box has been improved by adding material. Right now there are few errors.
1. The pinch roller space internally isnt big enough, i will fix it.
2. The outer nub that is for pinch roller clearance is too big causing the shock tower to interfere with gearbox, This sample can still be used by grinding that area. Again i will fix this.









Best of all my selling price is much lower than oosh123 ones on shapeways, and you can buy the halves separately. For 1st purchase you need buy 2 halves because each half is not compatible with the originals.

Well it arrived and it fits together really well. Rama has redesigned it really well. Its slightly different due to what he has done but you really need to look at it hard to notice the slight changes that have been done. You will need to make sure no washers are used between bearings on the out drives but this is just the build, really looking forward to test.