Is that under the castor block or the knuckle DCM??
I've got the kit 3mm under the stud on the castor block so you reckon another 2mm?
I noticed that compared to the BJ4 there should probs be a washer under the knuckle stud as well!
I might also go with a softer spring up front as well seeing as all i'll be running now is Lipo.
Bury i had Nimhs in, southport Lipo.
I milled the blocks down to make it rotate a bit more as i felt that was lacking first time out with it!
Shocks do have limiters for both up and down travel but just to shorten the shocks to proper length and stop the shafts hitting the outdrives.
|