|
#1
|
||||
|
||||
Custom Schumacher CAT 4wd layshafts
I'm having some layshafts made that will fit the 4wd CAT range XLS, Procat and Bosscat, these use basicly a bosscat shaft with a kf/kf2 slipper setup on the end.
For it to drive both pulleys you will need to modify one of the pulleys so the pin can pass all the way through but will be locked in so there shouldn't be a problem. This is the shaft Fitted Modified pulley I have used a 89t spur from RW and it's ideal Ok IF 10 people want a Layshaft then the price will be £35 each plus post, this is the actual cost of each shaft. He quoted £40 for 5 so that's why I'm pushing for at least 10, if more people want one then I will get an updated price from him on Monday. These won't be ready till the new year but he did say he would try and do them next week but wasn't promising anything. This under the understanding that I can sell 10. Payment won't be due till they are ready, payment to be made by paypal to me as a gift or please cover the fees. Postage should be no more than £2 in the UK anywhere else will be at cost. To complete this conversion you will need the following parts. 1 X U4480 Alloy Slipper Plates - Cougar KF these come as a pair but you will only need the rear plate. 1 X U3364 Slipper Pad; PTFE Octagon 1 X U4672 Alloy Outer Slipper Plate - KF2 1 X U4673 Slipper Spring- KF2 1 X U4674 Slipper Spring Bush - KF2 You'll need a bearing for the centre of the spur too ill measure that up later so you Know which one to use. As for Spurs they can be ordered from Neil at RW racing in any size other than what's already available neil@rwracing.co.uk So if you want one please comment below and I'll add your name. These are advertised on Facebook too. 1. Dave Rollinson 2. Odd-Arne Bjørklund 3. Mark Brown 4. Jamie R Cheshire 5. Jamie R Cheshire 6. Steve Haskins 7. Chris Ely 8. Eddscott 9. Graham North 10. Ting_Tong
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 Last edited by Peakey; 25-12-2015 at 05:02 PM. |
#2
|
|||
|
|||
I'll take one please.
|
#3
|
||||
|
||||
Ok buddy
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#4
|
|||
|
|||
Nice work Justin! I reckon a YZ10 version would do well!!
|
#5
|
||||
|
||||
The problem with the YZ10 TCS is you don't just need the shaft, the rear slipper plate is the pulley too so that's a problem there but you never know one day maybe
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#6
|
||||
|
||||
I'll take the last one so we can get these made
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#7
|
|||
|
|||
Have I missed the chance for one of these?
Si |
#8
|
||||
|
||||
No if you want one I can add you onto the list or if anyone else wnats one I'm sure I can tag more to the order
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#9
|
|||
|
|||
Yes please, put me down for one.
=) Thanks |
#10
|
||||
|
||||
Guys these should be done by the end of the week can you pm me your address and I'll sort you payment details out.
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#11
|
|||
|
|||
PM'd
=) |
|
|