|
#1
|
|||
|
|||
Losi 22 body shell for saddle packs
Hi Guys
I bought a second hand 22 and I am running saddle packs side by side and wondered if anyone know what body shells fit this set up. I am look for a forward cab body shell mostly and have been told FTX Vane and Pro line Bulldog shells should fit. If anyone who is running this setup could let me know which they are using or have used before I buy a shell that won't fit Any ideas welcome cheers k |
#2
|
|||
|
|||
I run the proline bulldog as I don't think the vane looks very eye pleasing, but I have heard the same about the two shells they can both accommodate saddles side by side, however remember you'll need to make some 90 degree battery connectors for them
|
#3
|
||||
|
||||
saddle 22 body
Hi keith 2005.i run the penguin hobao cab forward shell by penguin.You will find him on e-bay but talk to him first as he has several stlyes.just search for losi 22 and only £12 + postage.hope this helps jon kedge.
|
#4
|
||||
|
||||
Hi
The Phat Bodies "ROCCO" was designed to fit around saddle pack lipos and give more clearance in general not really a cab fwd, but a good looking shell for the 22 http://phatbodies.bigcartel.com/prod...occo-bodyshell
__________________
~Rick Evans~ ~LRP~shark st ft~lwb~ ~Carisma GT14B pro~ ~Schumacher KF2~ ~Schumacher Atom~ ~BSR Basher-RallyX~ ~Ascociated RC8.2e RallyX~ ~TeamC T8EV3 RallyX~ phat bodies worm-racing http://www.mendiprcraceway.co.uk |
|
|