|
#1
|
|||
|
|||
Robitronic Overloader
Robitronic Overloader for sale.
Good condition allways been stored in the box, comes with charging leads etc. Pretty much the same as the Pro peak charger except this one came first! Here all the facts This Charger is a high performance computerized battery maintenance system. Capable of charging, discharging, cycling and conditioning multiple rechargable battery types, with very high output power, a customized display with expertly designed software and programming controls, the Overloader is easily one of the smartest and most powerful R/C battery maintenance systems available! Features Perfect for all electric models Flexibility of handling multiple battery types Large blue backlight graphic LCD shows all informations Stores up to 10 different charge profiles Discharge batteries with 0.1~20 Amps to an adjustable discharge level Performs 1-10 cycles for NiCd/NiMH only and stores capacity & voltage data Top off charge for NiMH batteries for fully charging without overheating Built-in timer for delayed charge start Break-in electric motors Intelligent cooling FAN control system LCD contrast, fan operation, temp scale and sound cues are fully adjustable Various warning messages for improper input voltage, wrong connections, unsuitable battery condition or reverse polarity on output Blue anodized aluminum case Specifications: Case size: 176x134.7x52.9 mm Weight: 730 g Input voltage: 11 - 15V DC Battery type & cells: 1 - 10 cells - NiCd & NiMH / 1 - 4 cells - Li-Ion & Li-Po Battery capacity: 100 - 9900mAh Charge current: 0.1 ~ 8.0A adjustable (1C max for Li-Ion/Li-Po) Charge methods: Linear, reflex, impulse and 4-step Charge termination: Peak detection & zero delta V for NiCd/NiMH / constant current/constant voltage for Li-Ion/Li-PO) Delta Peak Sensitivity: 0 - 25mV adjustable Trickle charge current: 0 - 500mAh ONLY for NiCd & NiMH Top-off charge: 0 - 1000mAh ONLY for NiMH Discharge current: 0.1 ~ 20A adjustable (2C max for Li-Ion/Li-PO) Discharge cutoff voltage: 0.1 - 1.1V per cell NiCd & NiMH / 2.5 - 3.7V per cell Li-Ion/Li-PO Temperature cutoff: 10 - 55�C (50 - 132�F) Cycle count: 1 - 10 cycles ONLY for NiCd & NiMH Cycle cool-off delay: 1 - 30 minutes adjustable Battery memories: 10 memories Display type: 8-line, 21 character graphical LCD Motor break-in: 1.0 ~ 8.0V adjustable / 1sec ~ 24h adjustable and 10A constant £40 + pnp |
|
|