|
#1
|
|||
|
|||
Can you provide a CNC Service?
I am needing to get some parts cut from grp sheet.
Can provide cad drawings in most formats, the material to be cut, the correct cutters and reasonable remuneration for the service. Is there anyone out there with a cnc router that can do this? Regards Apricot
__________________
All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. |
#2
|
||||
|
||||
__________________
Built it Raced it Wrecked it |
#3
|
|||
|
|||
Quote:
__________________
All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. |
#4
|
|||
|
|||
I'll be happy to cut some parts for you, got 1mm, 2.4mm and 3mm black fibreglass, max size of 250mm x 400mm.
www.facebook.com/ORERacing has got some stuff I've made on there |
#5
|
|||
|
|||
Quote:
__________________
All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. |
#6
|
|||
|
|||
Thank you. It's a Stepcraft 420 ( https://www.stepcraft-systems.com/en/ ) with their 500watt spindle which has an air pump to keep dust out of the bearings, I really should have gone for their 600 router as it's much bigger! Software is Mach3 and DolphinCAD/CAM. Nice little machine and at the low end cost of cnc machines a very good tool, the thought of cutting fibreglass by hand hasn't been in my head ever since.
|
Thread Tools | |
Display Modes | |
|
|