Go Back   oOple.com Forums > General > 1/10th OFF ROAD

Reply
 
Thread Tools Display Modes
  #1  
Old 29-09-2020
pete2222 pete2222 is offline
Member
 
Join Date: Jul 2009
Posts: 189
Default How should I oil/grease/libricate screws and parts when re-assembling old buggy

I've taken my old B4 buggy apart and cleaned the bits thoroughly.

Hopefully I'll be able get it back together and running smoother!


1. Is it necessary or even detrimental to put anything on the clean screws before reassembling (its metal going into plastic right ? ) so maybe not needed?


2. Should I put grease on the transmission gears inside the rear assembly? They look clean and in perfect condition still and doesn't look like there has been any grease on them, which made me wonder.


3. Is it necessary to lubricate any of the other parts like hinge pins etc?


Thanks, any advice appreciated.
Reply With Quote
  #2  
Old 29-09-2020
brooksy's Avatar
brooksy brooksy is offline
Senior Member
 
Join Date: Oct 2008
Location: Somewhere between Sheffield and Worksop!.
Posts: 960
Default

Main thing to do would be to make sure all the heads are good on the screws and not stripped and to clean, make sure all gears are in good condition and re grease. All should be good, only recently did a full strip and clean down of a xxcr I bought.
__________________
TLR 22 5.0 AC Elite
TLR 22x4 Elite
TeamC Tm2v1
TeamC Tco2c Evo
Veteran
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com