B-max 2 mr

[dancr125]

Do any other shock tops fit the yokomo shocks

[cryer-evo]

I believe the ae ones will but not 100% on that

[blue_pinky]

I've got no idea! There a fair chance you'll find another manufacturers that'll fit, the big bore shocks designs are all pretty similar in size....but they are threaded obviously, so you'd need to find an exact match.

What are you trying to do? Have you had any probs with the standard ones? Not sure many/anyone will have tried any others unless they've had issues.

[discothesnake]

You'll need to be careful with sealing etc.

What issues have you Had? I've had no problems at all with any of my zyok shocks.

[s22jgs]

dont see why you would need to use any others really.

As long as you dont overtighten the bleed screw and strip the thread they are awesome. But thats the same with any shock top unless you run bladders

[dancr125]

Originally Posted by blue_pinky

I've got no idea! There a fair chance you'll find another manufacturers that'll fit, the big bore shocks designs are all pretty similar in size....but they are threaded obviously, so you'd need to find an exact match.

What are you trying to do? Have you had any probs with the standard ones? Not sure many/anyone will have tried any others unless they've had issues.

Broke 1 last night ,have ordered some but don't know if they will arrive in time for Sunday .my local shop don't stock yokomo . So just thought I'd ask if any1 else had tried any others .

[dancr125]

Originally Posted by s22jgs

dont see why you would need to use any others really.

As long as you dont overtighten the bleed screw and strip the thread they are awesome. But thats the same with any shock top unless you run bladders

I don't want to use others just dont know if new ones will arrive in time.as my local shop don't stock yokomo . Ps It snapped

[dancr125]

Originally Posted by discothesnake

You'll need to be careful with sealing etc.

What issues have you Had? I've had no problems at all with any of my zyok shocks.

It snapped .

[discothesnake]

MB models have them in stock. I am pretty sure they can get you them for tomorrow if you order now.

[dancr125]

Originally Posted by discothesnake

MB models have them in stock. I am pretty sure they can get you them for tomorrow if you order now.

Yea I ordered them last night from mb models the best place to go for yokomo. .just incase they don't turn up was thinking off backup plan lol

[mes]

As I overtightened several bleed screws, I was looking for an alternative, too. Someone on rctech checked AE, and they are too big.
My solution is to use only the insert of my hex driver (AE 1655) to ensure I don't overtighten any bleed screws again.

[dancr125]

Originally Posted by mes

As I overtightened several bleed screws, I was looking for an alternative, too. Someone on rctech checked AE, and they are too big.
My solution is to use only the insert of my hex driver (AE 1655) to ensure I don't overtighten any bleed screws again.

I havent yet overtightened a bleed screw but thanks for tip.myn broke on high speed impact with side of track at end of straight lol I've yet to Finnish a final yet which is disappointing when it goes so well in qualifing 3 out 3 = o finishes haha better luck next time