|
#1
|
||||
|
||||
What to back finished paintwork with?
What's the best stuff to protect the paint, I mainly use water based stuff but occasionally use a bit of Pactra paint so would need to work with both,
And how long do you leave your paint to cure before applying protective finish? Cheers for your input. |
#2
|
||||
|
||||
me - 2 days to cure, then 4 or 5 really light coats of Plastikote, blasted with a hairdryer in between.
__________________
Andy Grason - Sponsored by G. Singh Racing. Team Whiplash DEX210 Tresrey | DEX410 v3 | My Paint Work | My Trader Feedback |
#3
|
||||
|
||||
Cheers for the reply Andy what version of Plastikote are you using?
|
#4
|
||||
|
||||
__________________
Andy Grason - Sponsored by G. Singh Racing. Team Whiplash DEX210 Tresrey | DEX410 v3 | My Paint Work | My Trader Feedback |
#5
|
||||
|
||||
at the very least 24hrs after finishing and thats 24hrs on the radiators, then 2 very light coats of clear plasticoat no more or it adds lots of weight and can get brittle
__________________
Mattys the driver,my names carl
|
#6
|
||||
|
||||
must be a difference in each coats Carl - I've had no brittleness and the shells aren't unduly heavy either.
When I say "a coat", I mean one swing of the spray can. Apply two much at once and the plastikote attacks the paint. Each of my coats is seriously light ! Andy
__________________
Andy Grason - Sponsored by G. Singh Racing. Team Whiplash DEX210 Tresrey | DEX410 v3 | My Paint Work | My Trader Feedback |
#7
|
|||
|
|||
Andy
Where did you buy that big can of plast-kote from ? |
#8
|
||||
|
||||
er.... Halfords lacquer. Saw an 8th scale shell from nearly a year ago, used most weekends and the paint was damn near 100%. Lexan had failed in all sorts of places!!
__________________
www.facebook.com/gingapaint - GFX portfolio and gubbins |
#9
|
||||
|
||||
Can't remember pal !! It's lasted me so long, cos my coats are soooooo light !!
Screwfix maybe.
__________________
Andy Grason - Sponsored by G. Singh Racing. Team Whiplash DEX210 Tresrey | DEX410 v3 | My Paint Work | My Trader Feedback |
#10
|
||||
|
||||
flea bay for me
__________________
Mattys the driver,my names carl
|
#11
|
|||
|
|||
Interesting.
Since switching to createx paints - I've found that the shells need quit a lot of coats to properly cover / seal them. A couple of light coats is nothing and will not protect / seal the shell ? The idea is to fully seal it and also waterproof it. Andy - ill have a closer inspection of yours on Sunday. I saw Jordan's and it looked like there was a very decent coating on it - looked pretty thick to me ! |
#12
|
||||
|
||||
only ever done two lightish coats, done 100s of shells andy 1/8th 1/5th scale etc and never ever had a complaint about it being washed off may be your water based paint is to thick when ur spraying it if it needs 4 coats of laquer to cover it pal, dont always use palsticoat ether halfords laquer does the same job for a third the price
__________________
Mattys the driver,my names carl
|
#13
|
|||
|
|||
Next time you see me Carl - please show me one of your shells - id be very interested to see how the inside looks
Cheers. Andy |
#14
|
||||
|
||||
smooth as a babys bum andy lol
__________________
Mattys the driver,my names carl
|
#15
|
||||
|
||||
what a set of nerds we are!
__________________
Andy Grason - Sponsored by G. Singh Racing. Team Whiplash DEX210 Tresrey | DEX410 v3 | My Paint Work | My Trader Feedback |
#16
|
||||
|
||||
lol paint geeks
__________________
Mattys the driver,my names carl
|
#17
|
|||
|
|||
Been thinking about setting up a forum specifically for UK painters to share tips and stuff (like the old CFX.com). I rather like PaintGeeks.com, mind if I nick it
|
#18
|
||||
|
||||
sounds ok to me send us a link when ur done
paintgeeks like it go ahead
__________________
Mattys the driver,my names carl
|
#19
|
||||
|
||||
Just to add something a little different in, I ran out of plastikote so I had a dig around in my garage and come across this ....
It smells the same so I give it ago, it seems all good. I'm not that sure how much cheaper it is than plastikote tho. On the time left for backing I back mine pretty much straight after the paint job, I know people say you should let the paints dry out ect but I have been doing it like this for a while now with no ill affect, I just don't go to heavy on the first coat and flash off inbetween with a hair dryer, giving 2 or 3 coats in total ... |
#20
|
|||
|
|||
Ha Ha.
Being geeky about something is good - always aiming for perfection I might try the Lidel stuff my other half bought if that old can of gear was ok Andy I imagine it's all the same kind of stuff. |
|
|