Spektrum RX wire

[MHeadling]

I have a broken RX wire on a spektrum micro RX, can you buy this wire on its own??

Is it a special kind of wire or can I use some nomal small gauge cable??

[pugs]

If its an early one of the spektrum receivers its just single wire, if its newer then it chance to be the coax type cable ( centre copper core with braided cable outside ) strip a small part of the old one, or if you are feeling brave pop the receiver open, if it has a plug to the circuit board it is coax, if its soldered straight in its just single wire

[MHeadling]

Cheers for the reply Pugs, or the other option is to send it to you!

This is the RX I have:

http://www.spektrumrc.com/Products/D...ProdID=SPM1210

To me looks like a single core wire

[OneKiwi]

With the single you can just solder it in. Maybe try the orange RX as they are DMS2 and small as well. Cheap from HK.
THere is a site doing the clones that I used without problems

[MHeadling]

Thanks onekiwi, I dont think the orange rx will work as its on a KO esprit 3 with spektrum pro module.

[Northy]

I think that one just uses a piece of standard wire.

[russmini]

Standard wire, I actually have some pieces cut to the correct length.

If you're ok at soldering, whack me your address and I'll pop a couple in the post to you.

[MHeadling]

Thanks for the offer russmini, ended up fixing it track side with a normal rx single strand wire, all working fine.

cheers for the help guys