|
#1
|
||||
|
||||
lrp x12 ceramic bearing ?????
Hi i am after a set of lrp x12 ceramic motor bearings tried dms mk racing j e spares and no one seems to have them they only have standard ones if anyone has any or knows were i can get some from pm me thanks
__________________
There is nothing that gaffer tape and zip ties can't fix............... |
#2
|
||||
|
||||
Cheaper than the Lrp ones http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT
|
#3
|
||||
|
||||
Thank you
Thanks mate
__________________
There is nothing that gaffer tape and zip ties can't fix............... |
#4
|
||||
|
||||
Quote:
|
#5
|
|||
|
|||
LRP V12 bearings 4 x 10 x 4mm ABEC 9 ceramics
Hi guys. A pair of the above bearings ABEC9 4 x 10 x 4mm @ £8:25 a pair incl UK 1st class P&P.
If you can find cheaper incl P&P let me know. Alan041049 your first stop for top quality bearings, all sizes.. |
#6
|
||||
|
||||
are you sure the dimensions are 4x10x4mm?
I measured the inside and it is about 3.25mm and the outside is 9.5mm. Also checked the motor shaft and again is3.25... Am I missing something??? |
#7
|
||||
|
||||
@Floudas. You actually made me doubt the size i gave, so i went to the garage, stripped my X12 down and measured up the bearing only to find i was correct.
The actual size is 4 x 10 x 4 as first stated. The end of the shaft is 3.175 (1/8th) but most call it 3.2mm. Maybe that's what confused your vernier. LOL |
#8
|
||||
|
||||
Quote:
Sorry to put you in so much trouble I bought a pair of speed passion ceramic bearings and in the instructions said they fit the X12 also! but the measurements were these... So I can buy the ones mentioned above! Thanks |
#9
|
||||
|
||||
You didnt put me in any trouble floudas, it was the perfect excuse to disappear out the garage instead of watching Eastenders. Lol
|
#10
|
||||
|
||||
Quote:
I understand, I am married too... cheers |
Thread Tools | |
Display Modes | |
|
|