|
#1
|
||||
|
||||
4.1 shell options
I just brought a 4.1 vega but its not comming with a shell. so was just wondering what options there was and what seams to be the preferd shell to run
manic
__________________
pro95 (s/n111554), dtmi, rally, xk98 (in the post), XRS (s/n6120), X10, X11-08, X11 lipo B4.1 vega |
#2
|
|||
|
|||
Try the Penguin RC shell It's very nice, I did.
__________________
MOST important don't crash. Kyosho DB1 Kyosho Vega RB5 GenII Kyosho RB 6.7 MB MODELS www.rccarshop.co.uk www.ghostrc.co.uk |
#3
|
||||
|
||||
Yes i agree with simonW he has now done another last week a new cab forward i think he has 3 or 4 shells that fit the vegas.
|
#4
|
||||
|
||||
Does he have a web site do you know
manic
__________________
pro95 (s/n111554), dtmi, rally, xk98 (in the post), XRS (s/n6120), X10, X11-08, X11 lipo B4.1 vega |
#5
|
|||
|
|||
I have a gen2 vega shell.
You can have it for £15 posted, or £35 painted? |
#6
|
||||
|
||||
Lee Martin is running with the Proline Losi 22 rear motor Bulldog shell. It looks very good on the car but obviously you need to fit a spur cover which is not as straight forward to seal as a centro for example due to the shape of the motor plate. The Gen 2 Vega body has grown on me though....certainly a huge improvement on the original!!
|
#7
|
||||
|
||||
There is no web site, only ebay: http://www.ebay.co.uk/sch/haskins200...id=p4340.l2562
Here's a link to the new RB5 Vega shell http://www.ebay.co.uk/itm/Vega-Cab-F...#ht_500wt_1131 |
#8
|
||||
|
||||
I'm using a centro Proline bull dog and using the gear cover, it's off at the paint shop at the moment but I'll post up some pics when it's back.
|
#9
|
||||
|
||||
Quote:
I had assumed from pictures of the Centro shell that it narrowed too quickly just behind the motor to fit Vega.....but it works ok? |
#10
|
||||
|
||||
Its not a 100% perfect fit but seen one on Matt Owens Vega and looked pretty good to me!
There are a few gaps towards the rear of the chassis line but should be ok. |
#11
|
||||
|
||||
Sounds good.....Do people leave the gear cover open behind the spur gear?
|
#12
|
||||
|
||||
Lee has a lexan plate made up but seen some Vega RB5 using machined out motor plate over the top.
There is a thread done by jackel trader on how to do it |
#13
|
||||
|
||||
Bulldog
Few gaps, however this shell was originally cut for C4.1!!
__________________
Absima - InsideLineRacing - Puppy Paint |
#14
|
|||
|
|||
I prefer the standard centro shell shape and have just got a new one all painted up. Will it fit the Gen2 B4.1 vega??!??
|
#15
|
||||
|
||||
It will with very slight adjusting only
__________________
Absima - InsideLineRacing - Puppy Paint |
#16
|
|||
|
|||
Cheers Matt.
Sounds good, is it just at the rear of the shell that needs adjustment around the gear cover area? |
#17
|
||||
|
||||
Quote:
That's the one mate, and/maybe a minor cut at the front end (2mm tops) as my steering links caught the shell
__________________
Absima - InsideLineRacing - Puppy Paint |
#18
|
||||
|
||||
Cheeky spy shot of Team Xtreme's own Will Johnson's 201 Vega gen 2 with the new shell on, looks ace!
Pic courtesy of Team no idea |
#20
|
|||
|
|||
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
|
|