Lazer zxr

[oli4ke]

Henrik, did you received my PM's?

[isobarik]

Originally Posted by oli4ke

Henrik, did you received my PM's?

yes i will get back to you as soon as i know anything im a bit behind in the ordering situation...

mvh Isobarik

[oli4ke]

Originally Posted by isobarik

yes i will get back to you as soon as i know anything im a bit behind in the ordering situation...

mvh Isobarik

No worries, thanks mate!

[Welshy40]

Ok guys, the 3mm ceramic balls are a slightly smaller size ball but never the less do fit but do not slot in unlike the original size. they feel nice as well when all attached.

Only issue is the thrust race as the associated B4 thrust race doesnt fit and is way too big so now need to work out what ceramic thrust I can get thats not wider than 1.3mm.

Still good news my latest design rear gearbox CF sides are perfect so have now finished that totally. Im now working on the pivot blocks.

[HKS_TRD]

I ordered some 3mm ceramic balls too, glad to hear that they can be used, is there another size that would actually be the right size?

Speaking of pivot blocks, did you get your replacements from the guy in China, I didn't and they should have come in by now

[Welshy40]

No but will chase him tonight. Im going to try and find someone in the uk to make them and should be cheaper hopefully

[HKS_TRD]

I just emailed him now, see if he replies

By the sounds of it you would be getting some more stuff from Fibrelyte soon so I contacted Stephen about the parts he needs to make for me that you will pass on with the other items you have for me there, hopefully he can get onto them soon

[Welshy40]

Originally Posted by HKS_TRD

I just emailed him now, see if he replies

By the sounds of it you would be getting some more stuff from Fibrelyte soon so I contacted Stephen about the parts he needs to make for me that you will pass on with the other items you have for me there, hopefully he can get onto them soon

Dan,

I havent had the other bits made as of yet but will ask for it to be made at teh end of the month.

[HKS_TRD]

That will be fine, no massive rush

[Welshy40]

I believe I may have the solution to the ceramic thrust balls. I found that the 2mm or 5/64 associated thrust balls were too big but its possible that the 1/16th size may fit so have bought a set to test. Lets hope.......

[isobarik]

Since i went to the LHS i should have taken the last WBD-2 and then mystery solved...

mvh Isobarik

[kek23k]

Yaaay! I finally got one, thanks doug_jb

[isobarik]

Originally Posted by Welshy40

I believe I may have the solution to the ceramic thrust balls. I found that the 2mm or 5/64 associated thrust balls were too big but its possible that the 1/16th size may fit so have bought a set to test. Lets hope.......

Get the BRG-100 for the zx5 contains 8 small trhust balls and 2 washers

WBD -2 contain 8 small thrust balls and 2 washers

Since the zx5 and zxr have the same diameter for the drive shafts in teh the diff ....voila ...

problem solved

class dissmised

mvh isobarik

[Welshy40]

Originally Posted by HKS_TRD

When you say MKI does that mean ZX or ZX-R, I've got a ZX-R factory layshaft set up here but I am looking for the ZX-R bits to put aside for a future shelfer

First version zxr.

Also theres a lot of AR alloy bits on ebay worldwide such as castor blocks and a purple motor plate for a mk1 zx/zxr.

[Welshy40]

Just bought a bone of LA232 and a complete LA245 in total silver.

[Welshy40]

Iso, as no one is in at kyosho in the uk any ideas on where I can buy replacement pins for LAW30?

[rondoolaa]

does anyone know what size the pins are just in case i have some in my box i can send.

[Welshy40]

I will measure the diameter tonight.

On another front the 1/16 of an inch ceramic thrust balls from much more do fit. Ive put in a total of seven but is possible the eighth will also fit, which if i have time will redo. It feels smooth but as ive tightend all the way up its not yet free enough as it needs running in.

[kek23k]

Originally Posted by Welshy40

I will measure the diameter tonight.

On another front the 1/16 of an inch ceramic thrust balls from much more do fit. Ive put in a total of seven but is possible the eighth will also fit, which if i have time will redo. It feels smooth but as ive tightend all the way up its not yet free enough as it needs running in.

Yay! I feel like I got something right ;D

[Welshy40]

Im unsure if this is correct but with the help of Kyosho they have goven me a part number 92051 which is 2x11mm so now hope thats the size on mine and Iso's cars.