WANTED Tamiya Dynastorm / parts

[timmy]

As per title, Dynastorm parts needed to complete a roller for light use. New or used condition.
Thanks

[Origineelreclamebord]

Originally Posted by timmy

As per title, Dynastorm parts needed to complete a roller for light use. New or used condition.
Thanks

Must they be original, or would you consider aftermarket parts too? ORB Racing offers numerous that have been reinforced and improved to be more durable than the original parts, which are 3D printed using industrial technologies. Parts include the front and rear suspension blocks, wishbones, c-hubs/uprights, steering rack and more...

[timmy]

Thanks, been looking at the front bulkhead and uprights. I'm assuming they are durable?

[Origineelreclamebord]

Yes they are durable. To give you an idea, I've attached some pictures or what we have and what the bulkhead and uprights look like.

The D5 Bulkhead is built with more material at the shock tower mountings and hinge pins by removing the brass bushings and have holes for hex nuts instead of the press nuts that tend to strip with the original part.


The C-hubs/front uprights have more material around the mounting holes, particularly the camber link hole that is usually cracked with the original Tamiya parts.

The parts are printed in Polyamide / Nylon, which is stronger then the ABS material Tamiya used. In combination with the reinforcements in the design, the parts are considerably stronger. All parts are dyed black and ready to fit. For more info or orders you can send an email to ORB Racing via orbracing [at] gmail [dot] com or on Facebook.