Original Sanwa Exzes Manual anyone?

[andy110m]

Hi All,

As I posted in the FrSky section, I've recently found an older Exzes transmitter in the loft. It all still works so I've installed a 2.4 system in it but can't get it to set up to a Turnigy speedo. Its fine with LRP or Novak so a bit confusing.

Playing with the tranny I've found the brake EPA is set at 160% so I'm wondering if this could be playing a part. However I can't adjust it. All the other EPA's adjust but not the brake point. I must be doing something wrong so I'm hoping someone might have a manual they could email or know of a link. I've tried google but all I get is data for the newer models.

This is the first of the Exzes range, when they went from the older Gemini and Exerd, I've tried to attach a picture.

So if anyone can help I'd appreciate it.

Thanks.

[MiCk B.]

Hi,

When you are on the EPA screen did you try puling the break (hold break on). Then try to change the EPA.

The should be an adjustment wheel at the back to change the amount of break you get.

MiCk B. :-)

[andy110m]

Good suggestion Mick, I'll give that a go later and let you know how I get on.

Thanks.

[andy110m]

Mick, you win the gold star today.

You were right. You have to keep the brakes on, then turn the dial on the back.

I knew because everything else worked I was doing something wrong so thanks very much for the information.