Lazer zxr

[Welshy40]

I use a small hammer to hit the uj shaft and by hitting it through should all come apart, maybe if that doesnt work a screw driver between the hex and an abrupt hit with a hammer on the screw driver handle.

The manuals are good and easy to follow. Bearing sizes are there but i would avoid the rubber sealed bearings and get the metal cased bearings but avoid the cheapest as the saying goes you only get what you pay for, me i use acer ceramic but race at a high level so might not be for you, plus i use gt85 oil and spray to clean out and a drop of 5 weight or 10 oil, spin before putting back into the car, the gt85 helps retracts dirt whereas wd40 actually does the opposite, possibly due to wd40 being designed for plane engines in world war 2 hence why the name.as it took 40 attempts to get it right.

Chassis, top deck, shock towers front and rear, steering plate, servo plate are all available from fibrelyte, web address in my name tag below, a Parma Tomcat body shell is available from Kamtec, also web site in my name tag below. You will need to find a zxr undertray on ebay and wing.

Gear diffs if you have acthick grease that doesnt get thinner when it gets hot would be preferable, ball diffs i use tungsten thrust race using associated black grease and ceramic diff balls using associated clear grease. When built it should be smooth but firm so once run in will need adjusting so no slip.

Shocks you can buy traxxas trx 1 teflon coated shocks which are plenty on ebay, look on the trx1 manual to get the part numbers under option parts as they are what i use. However someone does make replica option house shocks, but have forgotten who. Otherwise you can fit big bore shocks but will need big bore shock tower mounts as well.

Ask any questions and we will try and answer.

[skrylle]

Great, thank you both for your Help!

[isobarik]

Welsh


for the front gearbox

just 2 machined sides basicly , instead of the la 32 box housing or what ever its called

mvh iso

[Welshy40]

Originally Posted by isobarik

Welsh


for the front gearbox

just 2 machined sides basicly , instead of the la 32 box housing or what ever its called

mvh iso

So basically exactly how i did in 90s when i cut away the middle bit totally. Yes that would be a great idea if we could get it done

[isobarik]

Originally Posted by Welshy40

So basically exactly how i did in 90s when i cut away the middle bit totally. Yes that would be a great idea if we could get it done

yeah make an design so we can se.

mvh iso

[suparajicon]

where can I get a ZX-R parts list?

[Welshy40]

Originally Posted by suparajicon

where can I get a ZX-R parts list?

From a zxr manual. Look on retromodelisme website under the manuals section. Great website

[suparajicon]

Originally Posted by Welshy40

From a zxr manual. Look on retromodelisme website under the manuals section. Great website

thanks!

[Kyosho_fan]

Hi,

I wanna shout out my gratitude for the dark ruler of kyosho-lazer-land -> LORD ISOBARIK
I have my parts on the way. So I can build my car shortly.
And also slowly we are becoming friends. (That is equal important)

I also want to say big thanks to Welshy40 for the same reasons.

Thanks guys!

[isobarik]

Originally Posted by Kyosho_fan

Hi,

I wanna shout out my gratitude for the dark ruler of kyosho-lazer-land -> LORD ISOBARIK
I have my parts on the way. So I can build my car shortly.
And also slowly we are becoming friends. (That is equal important)

I also want to say big thanks to Welshy40 for the same reasons.

Thanks guys!

Yeah bow for my awsomeness

mvh iso

[Welshy40]

Originally Posted by isobarik

Yeah bow for my awsomeness

mvh iso

Now Ive heard it all

[Welshy40]

Originally Posted by Kyosho_fan

Hi,

I wanna shout out my gratitude for the dark ruler of kyosho-lazer-land -> LORD ISOBARIK
I have my parts on the way. So I can build my car shortly.
And also slowly we are becoming friends. (That is equal important)

I also want to say big thanks to Welshy40 for the same reasons.

Thanks guys!

Your welcome, its Iso's thread and yes have kindof taken it over but as we both say if you have a Lazer ZX or ZXR your a friend of ours already

[HKS_TRD]

Originally Posted by isobarik

yeah make an design so we can se.

mvh iso

Would you be able to have a prototype 3D printed?

[Kyosho_fan]

Originally Posted by Welshy40

Your welcome, its Iso's thread and yes have kindof taken it over but as we both say if you have a Lazer ZX or ZXR your a friend of ours already

Well i got a few of those
1x ZX
2x ZXRR
3x ZX5 SP + RTR
1x ZX-S (being build as we speak)

So i'm safe for now

1 of the ZX-RR is going up for sale later this week. Completely new and unpainted, with original decals and manual.
2 ZX5 will go up for sale also shortly

[isobarik]

Originally Posted by Welshy40

Your welcome, its Iso's thread and yes have kindof taken it over but as we both say if you have a Lazer ZX or ZXR your a friend of ours already

welsh have an picture of the zxs undertaray on one of youre cars ????

mvh iso

[HKS_TRD]

Isn't it pretty much identical to a LWB Mid undertray with the exception of the cut lines?

[isobarik]

Originally Posted by HKS_TRD

Isn't it pretty much identical to a LWB Mid undertray with the exception of the cut lines?

Yeah but i just wanted to see for
Myself

Mv iso

[Kyosho_fan]

Originally Posted by isobarik

Yeah but i just wanted to see for
Myself

Mv iso

Interesting because i prefer an undertray and putting velcro on the undertray to keep body in place instead of drilling holes for bodymounts

[HKS_TRD]

Originally Posted by isobarik

Yeah but i just wanted to see for
Myself

Mv iso

I'm pretty sure I have a couple genuine LWB Mid undertrays new not cut out yet here

[zaccopelle]

Originally Posted by isobarik

yeah make an design so we can se.

mvh iso

I can both design and manufacture replacement parts for the zxs and zxs evo gearboxes if that would be of interest