|
#1
|
||||
|
||||
B-max 2 mr
Do any other shock tops fit the yokomo shocks
|
#2
|
|||
|
|||
I believe the ae ones will but not 100% on that
|
#3
|
||||
|
||||
I've got no idea! There a fair chance you'll find another manufacturers that'll fit, the big bore shocks designs are all pretty similar in size....but they are threaded obviously, so you'd need to find an exact match.
What are you trying to do? Have you had any probs with the standard ones? Not sure many/anyone will have tried any others unless they've had issues.
__________________
AKA: Andy Nancollis 1/10th drives: Yokomo BMax2MR & BMax4 1/16th drive: Carisma GTB Racing in South West: http://www.mendiprcraceway.co.uk/ Racing in Wales: www.caldicotrcracers.co.uk Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk Shells by Square Crabs |
#4
|
||||
|
||||
You'll need to be careful with sealing etc.
What issues have you Had? I've had no problems at all with any of my zyok shocks.
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#5
|
||||
|
||||
dont see why you would need to use any others really.
As long as you dont overtighten the bleed screw and strip the thread they are awesome. But thats the same with any shock top unless you run bladders
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#6
|
||||
|
||||
Quote:
|
#7
|
||||
|
||||
I don't want to use others just dont know if new ones will arrive in time.as my local shop don't stock yokomo . Ps It snapped
|
#8
|
||||
|
||||
It snapped .
|
#9
|
||||
|
||||
Yok shock caps
MB models have them in stock. I am pretty sure they can get you them for tomorrow if you order now.
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#10
|
||||
|
||||
Yea I ordered them last night from mb models the best place to go for yokomo. .just incase they don't turn up was thinking off backup plan lol
|
#11
|
|||
|
|||
As I overtightened several bleed screws, I was looking for an alternative, too. Someone on rctech checked AE, and they are too big.
My solution is to use only the insert of my hex driver (AE 1655) to ensure I don't overtighten any bleed screws again.
__________________
NRW Offroad Cup |
#12
|
||||
|
||||
I havent yet overtightened a bleed screw but thanks for tip.myn broke on high speed impact with side of track at end of straight lol I've yet to Finnish a final yet which is disappointing when it goes so well in qualifing 3 out 3 = o finishes haha better luck next time
|
|
|