View Full Version : anti squat shims
losichris
10-04-2013, 10:20 AM
New to the H2, can anyone explain where the anti squat shims sit?
Dont have a manual, photos would be helpful
Cheers
Chris
adon30
10-04-2013, 11:23 AM
Have a look here
http://www.oople.com/forums/showthread.php?t=117519&highlight=Hobao&page=9
Post number 177 (I think)
losichris
23-04-2013, 06:01 PM
Ok guys, really dont get this shim thing.
As the manual is completely useless, i want to achieve 2deg antisquat.
What shims do i need and where/which way round do they go?
Cheers
adon30
23-04-2013, 07:02 PM
Basically as it says in the thread:
Use the '0' 3mm curved shim on top of the rear block (in all cases).
Square shim under the front block of 2mm, then you need 1mm on top of front block for 2 degrees of antisquat.
losichris
23-04-2013, 07:06 PM
Basically as it says in the thread:
Use the '0' 3mm curved shim on top of the rear block (in all cases).
Square shim under the front block of 2mm, then you need 1mm on top of front block for 2 degrees of antisquat.
Ok thanks, so im guessing the curved shim labelled 1 goes on the top of the front block which is 1mm?
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.