Issues sxx?

[RobPaynter]

Just fitted a brand new sxx version 2 into my new dex210 and a new x12 6.5t. Set the speedo as per instructions ran fine on the bench. But as soon as I put it on the floor it would not go more than 3 foot before turning itself off. Changed motor and receiver still no better. Turned the high point on the transmitter down and it was better but only managed 4 laps before it turned off and now won't turn on at all. Just woundering if anyone had the same problem or any info that might help me understand this.

[steve_haskins]

Hi
I've has a similar prob, I'm no expert but I've been told some speed controllers draw more power than others from the reciever loosing signal , I have no prob with v1 but some with v2 I fitted a capacitor to the reciever which seems to help you can get on e bay for 3 or 4 pounds, they just plug in to any empty slot on the reciever
Hope this helps

[WHITTLER555]

Hi, are you using 40Mhz or 2.4Ghz because I believe the version 2 SXX and Nosram Pearl will not work with 40Mhz.