410 Djoints

[paulc]

Hi

Whos bought th d joint driveshaft set for the 410 and what do you think to them compared to the std ones are they worth the money ?

[Andyp]

They seem good to me, the drive train seems to run a lot more free on the bench this must help too keep stuff a little cooler, one bloke said tonight they make getting the driveshaft thro the hoop easier when removing the diff (not that's it's a great problem with stds)

If you need to replace your driveshafts as the originals are worn I would defo go for them

[Big G]

I fitted them and they certainly make things a bit more free rolling.

[gddevey1012]

The Car is alot smoother and spools up alot quicker as there is zero resistance on the drivetrain, I have been running them on polished floor and i would say that they cause an increase in accelaration without a doubt.

Well worth the money in my opinion

Gareth

[dpackster1980]

I've noticed the 2mm grub screw on the centre shaft doesn't come lose anymore because the vibration has disappeared due to the angle of the CVD is greatly reduced. It's also a lot quieter.

Well worth it. :thumbsup:

[slowjun]

so im jealous.... seem to be out of stock yet... any links as to where i can get it?.. thanks.

[Andyp]

so im jealous.... seem to be out of stock yet... any links as to where i can get it?.. thanks.

http://www.jespares.com/electric-models?page=shop.product_details&flypage=flypage.tpl&product_id=12252&category_id=1325

seems quiet good stock here.

[AmiSMB]

These d joints remind me of the Losi LSD front drive shafts which got rid of a lot of vibration on the front steering of a xx4. It does mean that you have extra drive pins and extra grub screws to worry about coming undone but if built properly (de-grease with nitro spray and use Locktite 222e and leave overnight) I am sure there is no problem.