|
#1
|
||||
|
||||
Ansmann X2 set up for astro
Whats everyone using set up wise for asto with the X2? E.g. Tyres and shock oils
__________________
|
#2
|
||||
|
||||
Depends on which X2? I run the Monkey with yellow shumacher mini spikes and blue inserts on rear and narrow yellow schumacher mini spike on the fronts. Associated factory shocks with blue springs front and silvers rear with 30wt oil all round. I now also run HPI Blitz front c hubs and axles which make the track 10mm narrower and it was fine. They fitted straight on too which is a bonus.
|
#3
|
||||
|
||||
There's only one X2, it is the rear motor
__________________
|
#4
|
||||
|
||||
I run the evo,my setup is
Front 30wt oil,kit springs,pistons,middle hole tower,outer hole wishbone Rear 25wt oil,kit springs,pistons,middle hole tower,inner hole wishbone 2mm washers under bulkhead ballstuds,alloy wishbone hanger with weight fitted,50g under the servo,100g under the lipo,everything else is as kit. In the wet,ballistic buggy green spikes rear,schumacher green mini spikes on the front,in the dry i use the AKULA AKX2
__________________
Cobra Racing Products,Penguin Custom Bodyshells,Ultimate RC Workshop,RC Car Zone |
#5
|
||||
|
||||
Cheers
__________________
|
|
|