|
#1
|
|||
|
|||
caster fusion f18.1
Hi there.
I've been working on this for a while now and having received the last few parts needed to finish it off, well i need a new body / under tray as its 5mm longer than std. i thought i'd share a few pic's and hopefully get some feed back from fellow micro racers. It started life as a fusion F18 rtr, I wanted to try and go down the route of the carisma gt14B , although i'm doing it 1/18th. I made a custom motor/spur gear mount and moved it as far forward as possible, the C of G is roughly in the centre of the car, more luck than design. Custom carbon chassis, top deck and shock towers and a cardon main drive shaft. hopefully you like what you see, any comments would be much appreciated |
#2
|
||||
|
||||
You might find a phat bodies bolt or mojo might fit that..
http://phatbodies.bigcartel.com/ Hope this helps. The bolt is for the longer duratrax vendetta/lrp shark lwb chassis. Hope this helps Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
|
|